Rheem Packaged Roof Top Units (RTUs)  (163)

Over the last year, we’ve become all too familiar with the risk posed by a deadly airborne virus, but, as we move out of lockdown, there are other airborne hazards we urgently need to fight. However, while advice and guidance are abundant in the use of heating, ventilation, and air conditioning systems in combating the spread of COVID-19, there has been very little said of the risk of using HVAC systems after a prolonged period of inactivity. As those familiar with HVAC systems know, air conditioning and ventilation systems are designed to be used regularly, if not constantly. Enclosed and moist environments As systems convey air and/or cool it, systems build up moisture and, having been inactive for many months, if not for a whole year, these humid, enclosed, and moist environments will have become a breeding ground for bacteria, mold, and fungus. Mould or mildew can grow in air ducts, filters, or vents as well as in drip pans and coils Mould or mildew can grow in air ducts, filters, or vents as well as in drip pans and coils. It spreads through the production of microscopic spores which float through the air and deposit on surfaces. In the right environments, these spores can form mold colonies, where they can then produce more spores that can be spread further. Worse, these spores can survive and linger in an atmosphere for long periods, and some molds can be deadly. Exposure to mold Now imagine that a contaminated HVAC system, which has been inactive for weeks, months, or even a whole year, is switched back on: Immediately, a current of air carries the spores through the ducting before projecting them out across every inhabited space, ready for workers, shoppers or visitors who are venturing out after lockdown to touch, inhale, eat or drink. As well as smelling musty and unpleasant, mold exposure can cause cold or allergy-like symptoms such as a stuffy nose, cough, or sore throat as well as headaches, nausea, skin and respiratory diseases. It can also be particularly dangerous to people who are immunocompromised or who have conditions such as asthma. Routine maintenance It sounds disgusting, but the risk is very much real. Unfortunately, there has been very little advice or guidance from the UK government to make property managers or users aware of this issue and so many will have neglected to protect themselves and their workers or visitors. Mould has always been able to grow inside HVAC systems, and this is why owners are obliged to have them regularly serviced. But unless that routine maintenance has gone ahead as planned throughout the lockdowns, and unless their systems have been inspected and disinfected again before opening, COVID-19 will be just one of many airborne health hazards people will face this summer. No clear warnings Government guidance encourages the use of various HVAC systems as part of its COVID-secure strategies Of course, the UK is not the only country to have imposed lockdown restrictions, and, over in America, their health authority, the Centres for Disease Control and Prevention (CDC) has published warnings around this. But, here in the UK, there have been no such messages: Government guidance encourages the use of various HVAC systems as part of its COVID-secure strategies, but it makes no clear warnings about the particular risk of using these after a period of prolonged inactivity. Mitigated risks I suspect that while larger workplaces with dedicated property managers and close connections to professionals such as ourselves will be more likely to have mitigated these risks, countless other organizations will not: I’m particularly concerned about small offices, hotels, restaurants, pubs, holiday cottages, and shops which may have systems unchecked for years and which would have had their hands full with other problems that were more pressing than maintaining an HVAC systems no-one is using. Cleaning and disinfecting HVAC Enhanced cleaning in other respects could also have made matters worse; if, for example, a carpet was shampooed at the start of lockdown and the HVAC system was turned off, a property manager will have inadvertently created the perfect environment for mold to thrive. Fortunately, HVAC systems can be disinfected and cleaned to make them safe again, but with so little awareness, many system owners will not be taking these steps. Action against mold However, while there may not be specific guidance in relation to the risk of mold in HVAC systems after lockdown, there are still laws in place which oblige property managers to take action. These include the Health & Safety at Work Act, The Workplace Health, Safety & Welfare Regulations, Occupiers Liability Act, and the Control of Substances Hazardous to Health Regulations. As a result, employers or property managers may be liable for illness or harm which may occur from the use of contaminated systems. As we approach the end of the lockdown restrictions, I would urge all HVAC engineers, property managers, and property maintenance professionals to immediately reach out to clients and warn them of this danger, because the last thing we need is another health crisis.

Across the globe, annual food loss amounts total to approximately 1.3 billion tons of waste and 4.4 gigatons of greenhouse gas (GHG) emissions. To put that in perspective: If food waste were a country, it would rank as the third largest GHG emitting country in the world, surpassed only by the United States and China. The average supermarket, which brings in about $35M in annual revenue, will see $526,590 worth of food waste and 3,600 MWh worth of wasted energy use, where about 2,000 MWh is used for refrigeration—the equivalent of 170 households. SaaS for temperature monitoring Clearly, there is both an economic and sustainability burden to food loss besides the revenue loss and environmental impact. Luckily, this burden can be eased when using Software as a Service (SaaS), like food temperature monitoring. Supermarkets who monitor their food temperatures will improve their margins and overall profitability by selling food at its full price rather than marked down due to over ripening or close to expiration date. This, in turn, will deliver improved customer satisfaction because supermarkets will be able to continue to stock fresh food while minimizing the sale of old and ripened provisions.Supermarkets who monitor their food temperatures will improve their margins and overall profitability There are many benefits of using SaaS to improve supermarket efficiency, which can help to reduce food waste and lower energy costs in countless supermarkets worldwide. Many of the roughly 50,000 food retail locations that utilize electronics controllers use some level of SaaS technology like Alsense Food Retail Services, the newest cloud offering from Danfoss Climate Solutions for supermarkets and food retail applications. Alsense Food Retail Services is a sustainable, scalable, and secure modern platform that delivers tangible data to improve operational and energy efficiency while optimizing the performance of food retail operations. Its technology is engineered to provide supermarkets with actionable insights that allow you to track refrigeration asset performance, respond to alarms, integrate 24/7 monitoring, reduce energy consumption, and more to deliver savings as high as a 40% reduction in food waste and 30% decrease in energy costs. Examples of food loss prevention with Alsense Food Retail Services The sensor in the meat fridge notices a high temperature and submits an alarm to the cloud The alarm is analyzed by the Danfoss Enterprise Service Team (Managed services) The reason for the alarm is determined and a service provider is contacted The service provider is dispatched to the supermarket to fix the issue in the meat fridge to avoid food loss Danfoss’ advanced algorithms detect if the refrigeration systems are running efficiently or if they are over consuming energy Alsense Food Retail Services is a sustainable, scalable, and secure modern platform that delivers tangible data to improve operational and energy efficiency while optimizing the performance of food retail operations aktiv & irma, a supermarket in North Germany, has shown significant savingsWithout SaaS, the store’s ROI will take much longer than if you rely solely on the hardware as part of the Alsense Food Retail Services pilot program. In collaboration with Danfoss, they installed a solar photovoltaic system, storage system, and a charging station for guests. All major assets in the supermarket system are linked through the Alsense Food Retail Services cloud to manage loads and eliminate unnecessary peaks to best use each store’s energy. Regulating energy levels is accomplished through a variety of methods that offer potential savings: Load shifting: As high as 20 kW in additional peak reductions ($1,758.30 potential savings). Compressor curtailment Solar: 112 MWh electricity produced ($16,410.80 savings) Battery: Grid demand reduced by 40 kW ($3,516.60 savings) Peak load shaving: Charging station is throttled if needed to maintain target max peak level in the store. ($2,344.40 potential savings) aktiv & irma saved about 15% in additional energy costs and reduced over 70 tons of CO2 for a total savings of $20,168.80 compared to other supermarkets. For supermarkets that are considering marrying SaaS with their hardware expenditure, the return on investment (ROI) will depend largely on their level of SaaS investment. Without SaaS, the store’s ROI will take much longer than if you rely solely on the hardware. To put it simply, the more robust the SaaS program, the quicker supermarkets will see a return on the overall system investment. Alsense Food Retail Services? A zero-net, even net positive, billable energy supermarket is possible. The prerequisites to make these savings happen are based on energy efficiency, particularly reducing overall consumption and onsite heat and electricity generation and storage. Energy arbitrage services can enable energy bill optimization. Essentially, this means that energy can be stored in a battery and used when prices in the grid are high.Precooling can also be used to cool down cabinets before prices increase Precooling (curtailment) can also be used to cool down cabinets before prices increase. Another option is to turn off compressors for as long as possible when the energy prices are high. This means temperatures will drift upwards, so turn on the compressors before the temperature compromises food quality. Lastly, supermarkets have further potential to balance the grid via fast Frequency Response, peak Load Shifting, and seasonal Buffering. SaaS technology, like Alsense Food Retail Services, is a strong compliment to hardware assets that can help supermarkets achieve higher profitability and food loss and waste reduction. If a supermarket aims to go zero- or positive-net, the solution is to invest in both hardware and SaaS.

Manufacturers continue to make improvements in heat-pump technology, including higher efficiencies, contractor-friendly designs, and innovative extras like two-stage compressors that allow them to run at lower speeds and cut down energy use and homeowners’ bills. Below is a sampling of six of the latest products to hit the heat pump market. Nortek Global HVAC introduced the W-Series of air conditioning and heat pump equipment for residential and light commercial applications, completing its redesign of Gibson®, NuTone®, and Frigidaire® branded 1.5- to 5-ton, single-phase air conditioning units and heat pumps. The redesign offers contractors a ‘good-better-best’ strategy (the premium F-Series, the mid-range E-Series, and the economically-priced W-Series) to accommodate varying consumer price ranges. Coil-Protecting wire guard The W-Series heat pump is available in 14- and 16-SEER models. Standard features include Copeland scroll compressors and a liquid line filter-drier for field installation in an accessible position to facilitate easy periodic change-outs. It also has a coil-protecting wire guard that adds cabinet structural integrity and holds a plastic mesh in place to safeguard against hail and accidental contact damage, plus an anti-corrosive polymer drain pan with more drainage holes to eliminate potential standing water. On the unit’s exterior cabinet, above the refrigerant access port, is a weather-proof QR code called ‘Charge Me’ that can be scanned to access Nortek’s charge assist tool. “The new W-series of heat pumps recently introduced by Gibson, Frigidaire, and NuTone features a high-tech way to charge,” said Dave Garvin, product manager, Nortek Global HVAC. Variable Speed Heat Pump Rheem’s next generation Prestige® heat pump harnesses the power of the new EcoNet Smart Thermostat “The proprietary website helps account for subcooling, fixed orifices, thermostatic expansion valves, ambient temperature at time of charging, lineset length, and other variables that can trip up contractors when charging any heat pump brand.” The Rheem® Prestige® Series EcoNet®-Enabled Variable Speed Heat Pump features a contractor-friendly design, which means expanded valve space and triple service access, for fast and easy install and repairs. Corner-service access allows optimal access to internal components, while individual louver panels speed coil cleaning and cabinet reassembly. Plus, Rheem’s next generation Prestige® heat pump harnesses the power of the new EcoNet Smart Thermostat, which provides control, monitoring, and one-touch alert capability. Proper installation and reduced time “Rheem’s Prestige Heat Pump powered by our EcoNet Smart Thermostat keeps contractors in control,” said Ryan Teschner, product manager for Rheem Mfg. “From real-time alerts and system notifications to a charge mode capability, which allows for proper installation and reduced time on the job, Rheem’s heat pump increases job site efficiencies and reduces labor costs for contractors.” The hybrid electric Voltex® from A. O. Smith has an energy factor (efficiency based on the amount of hot water produced per unit of fuel consumed over a typical day) of 2.3, and is Energy Star® qualified. “Heat pump water heaters use electricity to pull heat from the surrounding air rather than generating their own heat,” said Brandon Stepanek, national field marketing manager at A. O. Smith. Reducing greenhouse gas emissions Carrier’s Hybrid Heat systems automatically switch between electric and gas heating “This means that they can be a logical choice for dedicated green home builders interested in enhancing energy efficiency. Because a heat pump water heater uses energy efficiently, it can save customers up to 10 percent on energy bills, which adds up to thousands of dollars over the life of the water heater,” he continued. “The significant reduction in electricity use also has a direct effect on reducing greenhouse gas emissions.” Carrier’s Performance™ Series heat pumps offer a range of efficiencies that start at 14 SEER and reach 17.5 SEER and up to 9.5 HSPF. Combining a gas furnace, an electric heat pump, and a compatible thermostat, Carrier’s Hybrid Heat systems automatically switch between electric and gas heating to optimize the efficiency of each fuel source, helping defend homeowners against utility cost fluctuations. They have Energy Star designation. Carrier indoor furnace “Our microtube coil technology saves space and provides lasting comfort with its corrosion-resistant construction,” the company stated. “In addition, some models include innovative extras, like a two-speed compressor for added benefits like higher efficiency and even, consistent comfort. When installed with a custom-matched Carrier indoor furnace or fan coil and a Côr® Wi-Fi® thermostat, our two-stage heat pumps can operate on low stage up to 80 percent of the time to keep airflow and temperatures even and consistent while adding humidity control during cooling operation.” Heating operation is rated down to minus 5˚F outdoor temperature Fujitsu General America Inc. recently debuted the RGLX Series, three medium-static pressure ducted indoor units for the single-zone Halcyon mini split line. They have sufficient static pressure to heat or cool a whole house. Heating operation is rated down to minus 5˚F outdoor temperature. The 12,000-, 18,000-, and 24,000-Btuh models are Energy Star qualified. V-Shaped heat exchanger Units are available in seven sizes ranging from 12,000 to 48,000 Btuh, with efficiency ratings up to 21.3 SEER. The evaporators are slim enough to fit most ceiling spaces, making them ideal for hidden installations, while the condensing units can be installed below a window or in a narrow space. The new models can be installed in applications that require static pressure up to 0.80 inches of water column and offer maximum piping lengths of up to 246 feet. A built-in drain pump with 33.5 feet of vertical lift comes standard. “The combination of the V-shaped heat exchanger, air stabilizer, and the energy-efficient DC fan motor results in high efficiency and quiet operation,” Fujitsu wrote in the product specs. Customized indoor comfort The Goodman GSZC18 Heat Pump features the next-generation Copeland Scroll™ two-stage compressor coupled with Goodman’s ComfortBridge® communicating technology to deliver up to 19 SEER and 10 HSPF performance. ComfortBridge ‘off-the-wall’ technology gives contractors more installation options and intelligent controls. It works with any thermostat, including single-stage ones. ComfortBridge constantly gathers data, making automatic adjustments for peak performance ComfortBridge constantly gathers data, making automatic adjustments for peak performance, using the minimum energy needed for consistent, customized indoor comfort. A companion CoolCloud™ app connects technicians wirelessly via Bluetooth to ComfortBridge. Advanced ComfortAlert™ Diagnostics constantly monitor the system, reducing failures and pinpointing trouble spots. “Our 18-SEER heat pumps provide high-efficiency, energy-saving indoor comfort with the ease of installation as compared to less sophisticated products,” said Cory Gottfredson, senior product manager, Outdoor Split Systems for Goodman. Compressor crankcase heater “We have incorporated ComfortBridge technology to optimize installation while allowing homeowners to use any thermostat. This truly enhances both operation and installation, freeing contractors from hassles and leaving money in the hands of homeowners where it belongs.” The scroll compressor inside the GSZC18 is designed with fewer moving parts, and the high-efficiency, two-speed electronically commutated condenser fan motor with advanced fan design provides quiet airflow. Other features include SmartShift® technology with short-cycle protection, a bi-flow liquid-line filter-drier, suction line accumulator, high- and low-pressure switches, coil and ambient temperature sensors, a transformer, compressor crankcase heater, high-capacity muffler, and a color-coded terminal strip for non-communicating set-up.

Rheem, a renowned global manufacturer of HVAC and water heating solutions, recently unveiled the industry's most efficient hybrid electric water heater. Named ProTerra for its unmatched efficiencies, this ENERGY STAR certified water heater from Rheem is over 400 percent more efficient compared to any standard electric tank-type water heater in market and is more eco-friendly than ever at up to 4.0 UEF. "Rheem is committed to developing cutting-edge products that benefit end-users and our environment," said Ankur Maheshwari, Senior Product Manager, Rheem. "Our top-of-the-line ProTerra water heater can save homeowners money upon purchase in the form of a $300 federal tax credit, and because the system requires minimal power to operate, its carbon footprint is the lowest in its class." adjust water temperatures The ProTerra's compact design makes it a perfect tank replacement for even the home's smallest spaces. The system is available in the widest selection of gallon sizes in its category – 40, 50, 65, 80 – to support various hot water needs, and the ProTerra with LeakGuard model is now the industry's only hybrid water heater with built in leak detection and auto shutoff that limits water loss from the tank to no more than 20 ounces. LeakGuard protects the home against water damage, providing peace of mind for end-users. This all-new hybrid water heater also has Rheem's exclusive EcoNet Wifi technology built in. Once connected through the EcoNet mobile app, users can monitor the system from any location, adjust water temperatures for controlled comfort and receive maintenance alerts to ensure the system continues to run smoothly without interruption. detailed system diagnostics Plumbers can access detailed system diagnostics through Rheem's Contractor App Additionally, through the EcoNet mobile app, users can access Rheem's Hot Water Availability feature which indicates how much hot water is available in the tank, preventing any cold shower surprises. Other advanced features include scheduling around peak electricity rates, an energy usage tracker to manage consumption without sacrificing comfort and five operating modes to balance between energy usage and hot water availability. Plumbers can access detailed system diagnostics through Rheem's Contractor App, which shortens service visits and improves credibility in the field. The ProTerra has all serviceable components on the front of the unit, which also saves plumbers valuable time on a jobsite. Another benefit to plumbers is the unit's zero clearance requirement on the sides. This makes earthquakes straps easy to install, providing an extra benefit in California where earthquake straps are code. efficient water heater "Our ProTerra hybrid water heater is not only the most efficient water heater available; it is also NEEA Tier 4 certified and comes with CTA 2045 adaptor with full Demand Response capability out of the box," said Scott Cohen, Senior Manager, Rheem. "This level of product efficiency is Rheem's ongoing priority when developing new innovations and supports the company's 'Greater Degree of Good' sustainability initiative which includes reducing GHG emissions by 50 percent." The ProTerra qualifies for the highest level of energy rebates, will save homeowners up to nearly $500 in annual energy costs1 and will pay for itself within two years2. For more information on utility rebates, the local utility provider can be contacted or the website can be visited.

During the Annual Meeting, members of the association for the region’s HVACR manufacturers elected Mr Brian Suggitt, Managing Director, Systemair UAE, as President supported by Mr Tariq Al Ghussein, CEO of local company Taqeef as Vice-President. Thanks to continuous growth in previous years, the member gathering saw the approval of lower membership fee structures for its members, which ensures the longevity of the Association for the years ahead. The new Board further consists of Mr Asim Ansari (Export Sales Manager, Airedale), Mr Dani Elamana (Technical Director, Camfil Middle East), Mr Rafael van Eijcken (General Manager, Baltimore Aircoil Middle East), Mr Frank Taaning Grundholm (VP - Global HVACR Sales, ABB), Mr Iyad Al Jurdy (Senior Manager, LG Electronics), Mr Srinivasan Rangan (Director of Marketing and Product Management, Rheem MEA), Mr Naveen Sivakumar (Head of Marketing and Business Development, Danfoss) and Mr David Jacobs (VP and Managing Director EMEA, Baltimore Aircoil) as Born Board member elected by the Eurovent Association. Making a difference by driving change I am excited to see so much energy and enthusiasm in the new board" Eurovent Middle East has seen considerable growth and development since its inception and saw an unprecedented number of technical meetings in 2019. The industry body was active on multiple regulatory issues, supporting authorities with combined feedback from the industry, and its members with clarifications and the resolution of potential regulatory obstacles to free trade. In his third consecutive term steering the Association, Mr Suggitt has introduced a special theme for this year, “Making a difference by driving change.” The evolution of the group has been a remarkable example of the power of co-creation, as the newly elected President shares, “I am excited to see so much energy and enthusiasm in the new board.” Power of co-creation and cooperation “The development of the association from the beginning to now underlines the power of co-creation and cooperation. What we have achieved so far may not be immediately noticeable but would have never been able without the contributions and dedication of our members. We are competitors in the field, but what the field looks like is our common concern.” This should also encourage additional companies to consider a membership" Mr Tariq Al Ghussein, newly elected Vice-President adds, “People begin to gradually understand the benefits and opportunities an association provides. Having been in the board for over a year now and seeing the work, which was done, assures me that the path we’ve followed is the right one. I can only emphasise again that the region needs much more cooperation among the industry and its various partners, be it government entities, consultants or contractors.” Reduced membership fees Speaking on the reduced membership fees and other changes, Mr Markus Lattner, Managing Director of Eurovent Middle East explains, “It was initially planned to lower the fees when we reached a certain threshold of revenues. The growth in membership since the beginning allows us to make this step earlier than intended and thus easier for our members in an economically more difficult time.” “This should also encourage additional companies to consider a membership. Further steps include extending our reach into Egypt and Pakistan and publishing dedicated technical recommendations to provide guidance on key technologies. The acclaimed HVACR Leadership Workshops will be continued with Building Retrofit, Cold Chain and Data Centre Cooling events over the next three months.”