YORK Thermostats  (1)

With ongoing efforts from governments across the globe to reduce carbon emissions and with an ever greater focus on sustainability, it is vital that the HVAC sector does its part in becoming more environmentally conscious. And, while there have been steps to become more sustainable, there is a huge amount that still needs to be done to make sure that many of the targets that have been set are attainable. In buildings, both large and small, industrial heating accounts for roughly two thirds of industrial energy demand and around a fifth of global energy consumption. Figures like this show the need to have efficient and environmentally-friendly HVAC equipment in place to make the crucial steps towards reducing the contributions these systems make to our carbon footprint. High energy consumption in construction sector A 2019 report by The International Environment Agency (IEA) showed that the buildings and construction sectors combined were responsible for over 30% of global energy consumption and nearly 40% of carbon emissions. This is indicative of the steps the sector needs to take to play its role in a more eco-friendly society, some of which are already underway. However, much more needs to be done if the UK is to reach its goal of reaching net zero carbon emissions by 2050. As we envisage what a post-COVID world might look like, businesses and governments are continuing to put sustainability and lower carbon emissions at the forefront of their planning and the HVAC sector is certainly no exception. But with change in the sector a daunting prospect, decision-makers often don’t know where to start. Smart Technology use in HVAC systems Smart HVAC uses sensors that integrate with a building’s automation system With the constant growth and greater deployment of smart technologies within the HVAC sector, this is certainly a way that systems can become more efficient. Smart HVAC uses sensors that integrate with a building’s automation system. These sensors then collect information about conditions throughout the building. Heat waves are now a far more common occurrence in the United Kingdom. The Met Office estimates they are up to 30 times more likely and will be a bi-annual occurrence by 2050. It is important that any uptake in HVAC usage doesn’t lead to a drastic increase in emission generation. This is one of the areas where smart systems will become crucial. Many scientists have been unequivocal in their sentiment that heat waves are a cause of greater emissions and expect temperature records in the UK and Europe to be broken more regularly, so sites will need to be equipped to handle these conditions. Regulating temperature with hand-held devices With wireless systems now much more commonplace, temperatures can be controlled easily from hand-held devices. With these new technologies, those managing the systems can also benefit from remote monitoring and maintenance, reducing the need to travel to the site for yet another environmental incentive. To accompany the smart systems, equipment including smart thermostats can be installed to maximize HVAC efficiency. Other smart systems available to businesses include smart furnaces and air conditioning units that are far easier to operate than their traditional counterparts. Reducing unnecessary ventilation While global temperatures continue to rise, air conditioning usage has increased and has contributed to greater levels of energy usage. A huge amount of needless emissions are generated by unnecessary ventilation, contributing heavily to heat loss and overall energy wastage. Recirculation of air is a traditionally lower energy cost method of retaining heat and keeping emissions low, however, we must be mindful of the risks associated with recirculating air. The risk of circulating diseases is negated somewhat with heat recovery ventilation, which both removes the risk of disease spreading and improves energy consumption. Efficiency performance of new AC units Air conditioning units in particular contribute significantly to a building’s energy consumption Air conditioning units in particular contribute significantly to a building’s energy consumption, equating to 10% of the UK’s electricity consumption and as such it is important that we bear in mind ways to counteract the emissions this creates. Global energy demand for air conditioning units is expected to triple by 2050, as temperatures continue to rise year on year. The efficiency performance of new air conditioning units will be the key, when it comes to ensuring that escalating demand does not equate to greater emissions. Another issue for suppliers and manufacturers to address is differing rates of consumption for AC units in different countries, with units sold in Japan and the EU typically more efficient than those found in China and the US. Modularization Modular HVACs have also become increasingly popular in recent years. Modular HVACs are responsible for heating, cooling and distributing air through an entire building, with their increase in popularity largely down to their greater levels of energy efficiency, cost effectiveness, flexibility and substantial ease of installation and maintenance. Modular HVACs can be tailored specifically for workspaces and they often allow work to be done on the systems without disturbing the workforce, achieved primarily through rooftop placement. Commercial workspaces are larger and often require differing needs to residential properties and can cater to a wide range of the specific requirements of work and commercial spaces. As we strive for lower carbon emissions, it seems that this trend will continue and will become a key area in reducing emissions that HVACs have traditionally generated. System maintenance and training To meet government and industry requirements, many new buildings will require HVAC systems that can be maintained simply in order to perform in a more energy efficient way. Many companies are looking at ways to become climate neutral and significantly reduce their footprint Many companies are looking at ways to become climate neutral and significantly reduce their footprint. Companies are following the likes of German-based company, Wilo Group, who have announced they are committing to sustainable manufacturing by developing a new carbon neutral plant and HQ in the next few years. Lowering carbon footprint As we continue to move towards an ever more environmentally conscious society, it will be of paramount importance for companies, governments and the public to think about ways in which we can lower carbon emissions. Smart technologies will certainly be at the forefront of this, negating many needless journeys and making it easier for industries to adjust settings and tackle issues remotely. Greater levels of training will help equip us with the tools to make sure we are best placed to reduce emissions and be more sustainable as a result. While the steps outlined above do show some progress and measures we can take, there is far more that we can do as a sector to significantly reduce HVAC’s carbon footprint and once we have moved beyond the impact of the COVID-19 pandemic, this will surely be at the front of industry leader minds.

As we look back at 2020, we are all reflecting on the year that was, and what we have learned from it. In the HVAC space, the year provided us with opportunities for growth and change, as we adjusted to our “new normal.” Here’s a look at some of the HVAC trends we see happening now taking hold as we head into 2021. Advancements and applications in indoor air quality - especially in HVAC space (SF / MF / CRE) 2020 was filled with starts and stops with regards to innovation. Covid-19 halted work in some facilities altogether earlier in the year. The pandemic has brought with it a re-energized interest in the air quality around us, especially in the public sector. There has been a newfound imperative in creating indoor air quality solutions that ensure that air is circulated, sanitized and purified to reduce the likelihood of the spread of sickness. This is a massive issue and 2021 will see growing efforts in these areas and the increased introduction of systems that will purify air quality. HVAC building systems Continued push toward energy efficiency (mainly SF but also CRE) Energy efficiency will be an ongoing issue into the foreseeable future. Once we have looked back at 2020’s carbon emission reductions (because fewer people were flying and driving) there will be no turning back. The same can be said for HVAC. Increased efficiency will continue to be an ongoing pursuit in 2021 and beyond. On average, HVAC appliances consume 48% of a household’s total energy usage. The latest generation of smart thermostats that use the newer 410A refrigerant have brought about reduced energy consumption by up to 35% optimizing how HVAC building systems are operated (reducing the possibility of leaving the AC on too long, and when it’s not necessary to use). convenience and energy savings Increase in supply chain management / platform services HVAC services such as those that collect and manage data including HVAC unit age, efficiency and condition at the property and portfolio level will continue to see increased adoption. These convenience and energy savings they provide is being seen in the multi-family and commercial space, especially with some building owners having been grounded by the pandemic in 2020. New construction had a role in expanding interest in HVAC asset tagging and helping it gain traction in the industry The data gathered by these services can be used in the future to predict HVAC system failures with significant accuracy before they happen. The convenience and potential cost savings acquired by implementing these services will continue to push their popularity into 2021. Additionally, it is interesting to note that new construction in 2020 had a role in expanding interest in HVAC asset tagging and helping it gain traction in the industry. Cataloguing HVAC assets ensures the follow up and guarantees that warranty registration holds and can help track future maintenance during a hold. At the time of sale, the current owner can present true data of the maintenance of these systems, which can increase the current value of the property and can also be used as a tool in negotiation. performing regular maintenance Remote monitoring can be the end to end solution that completes the action behind the alert (CRE mainly) Remote monitoring will continue to see adoption in 2021. Service providers will continue to rely less and less on clients identifying and reporting a problem a heating/cooling issue. The complaint from the tenant may come in some hours after the problem actually starts, and then by the time they get a service request completed, several hours more. And by the time the contractor is on the scene, it is likely more time has elapsed. Remote monitoring also results in regular maintenance, extending the lifetime of a HVAC system. By proactively performing regular maintenance, the overall costs of maintaining a system can be reduced by 40 percent, in addition to ensuring that units are always using the least amount of energy necessary. seamless customer experience Consolidation of HVAC services and equipment - the way people buy - turnkey integrated services One stop shopping for HVAC services and equipment gained popularity in 2020 One stop shopping for HVAC services and equipment gained popularity in 2020 and we will continue to see increased traction in 2021. There are many reasons why developers what to buy equipment directly from the manufacturer, such as convenience, working with a supplier because of its reputation, cost and guarantees on product and services. As more developers buy equipment directly, these manufacturers are responding by helping out with mechanical drawings. This process cuts down the supply chain, allows certainty that correct equipment is quoted, and saves money. The HVAC industry is also turning the corner in becoming more proactive in remediating failing assets and contractors are redoubling their efforts to provide a seamless customer experience increasing customer satisfaction for multi-family communities as well as other means of optimization of services that positively impact tenants, helping increase retention. HVAC providers that can manage the entire process from installation, to job request to invoicing, even reporting and tracking for each job, will be increasingly in demand in 2021.

Inverter driven air conditioning is more energy efficient, cheaper to operate and more profitable to install than its non-inverter driven equivalent. Here Neil Ballinger, head of EMEA at automation parts supplier EU Automation, explains how HVAC engineers can maintain the inverters in their customer’s aircon units. Do you remember cross country at school? It was exhausting; miles of seemingly pointless jogging and sprinting and, if the teacher was not looking, walking. If you were unlucky enough to be born before modern safeguarding measures were introduced, it probably also meant getting lost in the nearest woods.Why isn’t every installation an inverter driven unit, instead of the traditional single stage or dual stage models? My PE teacher, who seemed particularly vicious at the time, but in retrospect just knew about sports science than most, used to make us do something called fartlek as well. This meant long distance runs, incorporating elements of speed training by mixing up sprints with jogs and walks. The worst bit was starting to run again after a walk. That is exactly how the motor in your customer’s air conditioner feel if the units you fit are not inverter controlled. The motor has to act just like a runner doing fartlek — it sprints continuously, operating at full speed until the thermostat tells it the room is cool, then it stops. When the room gets warm, it starts again, powers immediately up to full speed and repeats the process indefinitely. Just like a teenage cross-country runner, it is the starting and stopping that is the tough bit. Furthermore, the unit probably doesn’t have to run at full speed to keep the room at the correct temperature, if the motor were inverter controlled it would speed up and slow down as the temperature fluctuates. Why isn’t all aircon inverter driven? We all know that inverter driven aircon is better than its non-inverter driven cousins. It can provide heating as well as cooling and the lifetime cost of use is less for the customer — because their energy bills stay low. The cost of installation is also higher because it is a more complex job, so it works out better for the contractor. It’s a win-win. The research firm Technavio even lists it as one of the key technologies driving growth in the HVAC market in its annual reports every year. So, the only question is, why isn’t every installation an inverter driven unit, instead of the traditional single stage or dual stage models?When contractors contact EU Automation to buy automation parts, for the units they maintain, they have given us another reason: maintenance Cost is a factor, but when contractors contact EU Automation to buy replacement motors and inverters, and other automation parts, for the units they maintain, they have given us another reason: maintenance. As HVAC engineers, we are not necessarily specialists in power electronics, and this makes inverter maintenance daunting. Microcontrollers and IGBTs (Insulated Gate Bipolar Transistors) are not beyond us by any means, but they can be intimidating. Personally, I would back an electrical or heating engineer over an electronics specialist in a problem-solving contest all day long; but that doesn’t solve the problem at hand. Furthermore, while we are experts in air conditioning brands, and know our Daikins and Grees from our Mitsubishis and Fujitsus, we don’t necessarily have contacts at the inverter manufacturers. Amtech, Danfoss, Vacon and Yaskawa are all names we know, but the local dealer for any of them is probably not in your phone book. This is especially true if the unit you need is from a first-generation inverter driven aircon unit and well over a decade old. While we are experts in air conditioning brands, and know our Daikins and Grees from our Mitsubishis and Fujitsus, we don’t necessarily have contacts at the inverter manufacturers Maintenance techniques While inverter maintenance can be daunting, it isn’t difficult. The tools you will need most often are nothing more than a rag and a spanner, while the more esoteric kit is stuff you probably carry anyway, a laptop, vacuum and a Fluke meter. Before you start, remember that while we tend to refer to an inverter as an inverter, the manufacturers themselves, and many of the sources of information online, often refer to them as VSDs (Variable Speed Drives), VFDs (Variable Frequency Drives) or just plain old drives. As a result, when you are searching online for a video to explain something, it’s worth using all three of those terms, alongside the inverter manufacturer’s name and the problem to make sure you get the right result.While inverter maintenance can be daunting, it isn’t difficult When you do move on to maintenance, step one is simple; make sure that the unit is free of dust. This is as easy as vacuuming the heatsink with an ESD (Electrostatic Discharge) vacuum cleaner when you perform routine maintenance or investigate a problem. While you are checking for build up of dust and daily grime, check the filters. They will probably have to be replaced during annual maintenance, but high use might mean they need to be replaced more often. The control panel itself should be well ventilated and free of dust as well, if it isn’t it can overheat, which is the number one cause of inverter damage and the most common reason contractors contact us for replacement units. Before you put your vacuum and duster away, you should make sure that the inverter unit’s location is clean and as sheltered from the elements as possible. Because it’s normally situated on a roof, it’s not going to be perfect, but the units are designed to take a limited battering. That doesn’t mean it’s okay for them to be covered in leaves, surrounded by rubbish or immediately beneath the guttering outlet though! Before you put your vacuum and duster away, you should make sure that the inverter unit’s location is clean and as sheltered from the elements as possible Get out the spanner Once you’ve finished these steps, you are done with dusting for now, it’s time to get out your screwdriver and your spanner. Step one is to make sure the fans on the inverter are operating normally, without noise and with nothing blocking their rotation. The fan keeps the internal components running effectively, just as it does on PC, and if its function is impaired the capacitors will overheat and the inverter will fail.When you install or maintain an inverter on an air conditioning system, it is a sensible precaution to back up the drive parameters to your laptop The next job is to grab your spanner and make sure the power terminals are on tight. Loose connections cause arcing, overheating and even melting of components and are easily checked during any kind of maintenance and repair. While we are still in the realms of the work your apprentice can do with their eyes closed, you should also make sure that the inverter’s removable LCD control pad is stored sensibly and not continually attached to the drive. If it remains attached, there is a chance the display will stay on permanently, which means that when you need it to diagnose a problem, it will probably already be burnt out. Break out the laptop When you install or maintain an inverter on an air conditioning system, it is a sensible precaution to back up the drive parameters to your laptop. It takes minutes and is normally done by using the removable LCD control. In fact, it’s often as simple as selecting ‘PARs’ and then ‘BACKUP’ from the menu. If you struggle, there are lots of videos on YouTube, like this one, which explain the process for each drive. As a result, if the inverter ever does need replacing, you can whip out your backed up parameters and order a new or refurbished one easily, before reloading the parameters to the replacement and getting up and running in no time. Your customers will think you are a power electronics genius, as well as a HVAC expert, and they will be loyal for life; especially of you save them on a hot day! If you follow these simple measures, you will find that the inverters in your customer’s air conditioning units last much longer and no motors will have to run the equivalent of a cross country, thanks to a lack of inverter control.

Johnson Controls recently partnered with Air One Heating & Cooling, Star Air Conditioning & Heating, and YORK Factory Direct to install YORK® heating and cooling systems in two Building Homes for Heroes mortgage-free homes for wounded veterans in Daytona, Florida., and Orlando, Florida. Air One Heating & Cooling installed equipment donated by YORK Factory Direct in the home of Sergeant Carlos Cruz in Daytona, Florida, Cruz, who joined the military out of San Antonio, Texas in 1997, was injured during his 20-year deployment, causing him to suffer from severe post-traumatic stress disorder (PTSD), herniated discs in his back, left ACL reconstruction, migraines, and chronic pain. Suffer multiple injuries Star Air Conditioning & Heating installed equipment that was also donated by YORK Factory Direct in the home of U.S. Marine Corps Sergeant Jorge Zapata in Orlando, Florida, Zapata, who joined the military out of Parris Island, S.C., was injured during his deployment to Iraq, causing him to suffer multiple injuries, including PTSD and a traumatic brain injury. The injuries of both veterans require specific modifications in their homes in order to live safely and focus on their recoveries. "We’re proud to partner with Johnson Controls and Building Homes for Heroes to give back to a real hero within our local community who has made great sacrifices for our country,” said Larry Franklin Sr., Owner, Star Air Conditioning & Heating. “We’re honored to contribute our services to help Sergeant Jorge Zapata and his family live comfortably in their home.” Renovate quality homes The organization strives to build or renovate quality homes and donate them to injured veterans Building Homes for Heroes is a national organization that recognizes those who serve in the United States Armed Forces by supporting the needs of severely wounded or disabled soldiers and their families. The organization strives to build or renovate quality homes and donate them, mortgage-free, to injured veterans nationwide. “The customized amenities that Johnson Controls brings to these homes provide not only a foundation for these heroes, but a hopeful path to a bright future with the opportunity to reach dreams they may have never thought imaginable when injured,” said Andy Pujol, Founder and CEO of Building Homes for Heroes. Veteran-Friendly company “We are so grateful to partner with Johnson Controls, Air One Heating & Cooling, Star Air Conditioning & Cooling and YORK® Factory Direct to help these veterans and their families to live in greater comfort.” The YORK brand of Johnson Controls has been a proud sponsor of Building Homes for Heroes since 2014. The company has been recognized by US Veterans Magazine as a top veteran-friendly company. Johnson Controls is also committed to hiring veterans and military spouses. Veteran employees are honored to design, engineer, and assemble systems that help improve the lives of fellow veterans. 

Johnson Controls, the globally renowned company for smart, healthy and sustainable building solutions, has launched through its YORK brand a 10-year residential HVAC leasing program: Ultimate Home Comfort. This industry-first solution provides homeowners with a new, fully installed YORK high-efficiency HVAC system with no money down, as well as factory-backed 10-year parts and labor coverage, and 10 years of service repairs and annual maintenance – all for one, low monthly payment. Ultimate Home Comfort by YORK Ultimate Home Comfort delivers stress-free, year-round heating and cooling to homeowners Ultimate Home Comfort delivers stress-free, year-round heating and cooling to homeowners, with up to 53% energy savings (compared to older, 10 SEER systems), with a YORK high-efficiency HVAC system, which are part of Johnson Controls OpenBlue connected suite of technologies. For homeowners, the all-in-one program delivers ultimate peace of mind and predictable costs for 10 years. For contractors, this turnkey solution offers the opportunity to obtain double-digit profits, a 10-year change-out cycle, and up to 55% average gross margin on installs. One-of-a-kind leasing program “Ultimate Home Comfort by YORK is a one-of-a-kind leasing program that was designed with the simplicity and convenience that homeowners crave and the guaranteed business that contractors work years to achieve,” said Tim Brusseau, Director of Business Development for Ducted Systems at Johnson Controls. Tim Brusseau adds, “It’s an easy decision for both homeowners and contractors alike that provides peace of mind for everyone involved.” Easy, built-in sales process Unlike a traditional selling structure, greater sales compensation and recurring revenue is made possible through Ultimate Home Comfort’s easy, built-in sales process. The all-in-one solution is offered directly from YORK to contractors, not through a third party, and it ensures that customers are retained for at least 10 years. In addition, contractor employee turnover is reduced. There’s no cost to join the program for YORK Certified Comfort Experts or Liberties Plus contractors.

Johnson Controls, the provider of smart, healthy and sustainable buildings, has, through its YORK® brand, released a new residential heat pump that provides the ideal solution for spaces that require a compact design, without sacrificing comfort or efficiency. The YORK® HMH7 horizontal discharge heat pump is designed to provide the comfort and technology of a mid-tier efficiency unit at the cost of a base-tier vertical unit, with flexible installation options and innovative features. Unlike traditional vertical discharge units, the HMH7 heat pump has a 40% smaller footprint, making it a great system for homes in temperate, high-density regions that require a compact design, such as properties with zero lot lines. Lower utility bills They can be placed anywhere a vertical unit can, and often in places vertical units cannot fit, thanks to greater clearance and setback flexibility. All HMH7 heat pumps follow standard installation procedures with conventional equipment and devices, using simple kits with relay, wiring, and bi-flow filters/dryers. The systems are designed to work with YORK® variable speed or standard ECM indoor air handling equipment, providing many system installation options. In addition, no unique installation procedures are required. YORK® HMH7 heat pumps, which are part of Johnson Controls OpenBlue connected suite of technologies, reach up to 18 SEER and up to 10.5 HSPF, which can result in lower utility bills compared to older units, saving homeowners money. Reducing energy usage Horizontal discharge systems offer the consumer and homeowner enhanced value and performance" Inverter system and modulating technology smoothly ramp up operation and continuously adjust, avoiding spikes in energy use while helping to increase overall system longevity and reducing energy usage. “Unlike the standard vertical heat pumps, which discharge air out the top of the unit, these compact systems discharge air and sound horizontally away from the home, offering a litany of benefits to both the contractors and homeowners,” said Bryan Rocky, director of residential technical services, Ducted Systems, Johnson Controls. “Horizontal discharge systems offer the consumer and homeowner enhanced value and performance in certain applications and installations where space is a premium, yet can be applied in any standard installations as well.” Horizontal discharge system Another key advantage to the horizontal discharge system is an innovative fan design that creates less vibration and provides quieter operation. Sound output is as low as a typical dishwasher at 54 dBA, which is 36% lower sound levels than standard heat pump units. YORK® HMH7 heat pumps are available in 2, 3, 4, and 5-ton options to ensure a precise, effective solution for the customers’ needs. They come standard with a 10-year Compressor Limited Warranty and a 10-year Parts Limited Warranty with product registration, and extended warranties are available.