WaterFurnace Geothermal units  (25)

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).

COMPRESSOR: Scroll single speed, in commercial voltages. Compressor blanket option available for improved noise reduction. BLOWER INLET RINGS: Allow for easy motor and blower removal without disconnecting from the unit duct work. FILTER: 1” MERV 4 disposable filter with filter rail is standard while a 2” pleated MERV 13 and deluxe filter rack are optional. Field switchable from 1” or 2” filters. CABINET: Small footprint ideal for retrofit applications. Heavy gauge, environmentally responsible galvanized steel for maximum corrosion resistance. Standard foil-faced cabinet insulation for improved air quality and easy cleaning. BLOWER MOTOR: PSC blower motors provide high efficiency while allowing quiet operation and wide range of airflow selections. Optional X13 and variablespeed ECM 2.3 blower motors are available for improved efficiency and comfort. CONTROLS: Aurora microprocessor control is standard. Optional Aurora Universal Protocol Converter (UPC) control is available featuring N2, LonWorks, and BACnet compatibility. DRAIN PAN: Corrosion-resistant composite drain pan is standard while an optional stainless steel drain pan is available. WATER VALVE: Optional factory-installed, low pressure drop (high Cv) water solenoid valve for variable speed pumping applications. Feature complies with ASHRAE 90.1 standard requirement for WSHP. Pair with optional Automatic Water Flow Control Valve to ensure proper water flow rate. ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec Compact units to provide exceptional durability and high efficiencies. Added protection is also available with an optional AlumiSeal™ coating. THERMASHIELD™: Optional WaterFurnace-exclusive coating applied to water-to-refrigerant heat exchanger that protects against condensate damage in extended range applications (below 50°F).