Some days, when the user turns on the heater, they smell a burning smell. And with winter and inflated energy bills fast approaching, there’s always a nagging thought: Is the heater safe?
If users ever wondered about that smell when turning on the heater, Air Docs are here to tell the user that the burning smell is just fine. It turns out that natural gas leaks are extremely rare. Here are some possible causes of a burning smell when the user turns on the heater.
Damaged electrical wiring
If the heater is not working properly, this is most likely why users are getting a burning smell. Whether it’s improper installation or faulty wiring, there is always the chance something goes wrong when the wires are installed.
If this is the cause of the “burning” heater, be sure to call an electrician to fix any damage.
Trapped debris in the heater
If users regularly use the heater, there is always the possibility that a foreign object will end up in it
If users regularly use the heater, there is always the possibility that a foreign object will end up in it. If this occurs, the user will most likely experience a burning smell.
This is because a lot of debris can end up clogging the vents inside the unit, compromising the health and safety of those around the user.
A Faulty thermostat
If the thermostat is not allowing the heater to turn on, this is one of the possible causes of a burning smell.
More often than not, users will notice this scent when user turn on the heat as the heater turns off as soon as it reaches a specific temperature. This happens because the thermostat is faulty and does not send any heat to the unit.
Gas leak
Imagine turning on the heater and smelling something burning. A user looks around and finds no source of the smell, but the burning smell continues.
This is because the user could have a gas leak, which could lead to carbon monoxide poisoning if the issue is left unchecked. When users suspect a gas leak, call Air Docs Heating & Cooling to come to inspect the home for any leaks.
old heater
If users have an older heater, user are more susceptible to experiencing a burning smell when user turn it on
Just like any other appliance, the heater will eventually break down. This event is often referred to as “out of warranty.”
If users have an older heater, user are more susceptible to experiencing a burning smell when user turn it on. This is because there are generally more parts inside the unit that have gone bad.
the heating element
If users are getting a burning smell from the heater, it could be that the heating element is bad. These are metal coils that are found inside the unit.
If one of them has gone bad, it can cause this smell to occur when the heater is turned on. When this happens, the user will need to have the unit replaced.
dust on the furnace
There is no denying that when the user turns on the furnace unit, the user will smell things burning. Some people believe this is because of dust on the coils of the unit. If this is the case, there’s no need to worry.
user may be experiencing a burning smell because some things can burn in the heater when turned on. These include any fabric that could have been lying around, as well as carpeting under the home.
dirty furnace air vents or filters
The furnace air filters are located in the unit for a reason to filter out many contaminants
One of the causes of a burning smell, when the user turns on the heater, is because the filters are dirty. The furnace air filters are located in the unit for a reason to filter out many contaminants from the air.
If they have gotten dirty, this can be one of the reasons why users smell a burning smell when user turn on the heat. When this happens, remove them and clean them to ensure that the home is safe.
damaged furnace filter fan
If the furnace filter fan is not operating properly, this can cause a burning smell when it is turned on.
This is because the air going to the furnace filter does not reach it because of a faulty fan.
defective furnace belt
Just like any other appliance, the heater can eventually break down. When this happens, the user could experience a burning smell as a result of the defective furnace belt.
This is because the belt from the heater can be pulled from its mounting. If this occurs, the user will smell something similar to a burning rubber when the user turns on the heater. If this happens, the user will need to replace the belt.
damaged furnace
It usually works best to make sure that the furnace in the home is working correctly before
If the furnace in the home is damaged or is not working properly, then it can be one of the possible reasons for a burning smell when the user turns on the heater.
This is because the heating unit has failed. If this happens, the user will need to have it fixed before the user can use it again. It usually works best to make sure that the furnace in the home is working correctly before using it again.
a burnt-out pilot light
If the user turns on the heater and finds out that the pilot light is not working, this can be one of the reasons why the user is getting a burning smell.
This is because the pilot light is used to ignite the heater once it has been turned on. If this happens, the user will need to replace the pilot light as soon as possible.
a faulty igniter
If the igniter is not working properly, this is one of the causes of a burning smell when the user turns on the heater. This is because this small device helps to light the fuel and ignite it.
If the igniter fails, the user will notice a burning smell when the user turns on the heater. For this reason, it is important to make sure that this part is in good condition before using the heater again.
a dirty burner head
The burner head is designed to ignite the fuel used to heat the home
If the burner head is dirty, this can be one of the reasons for a burning smell when the user turns on the heater. The burner head is designed to ignite the fuel used to heat the home.
If it is dirty, it will not perform at its best, and the user will notice a burning smell while using the heater.
dirty or damaged heat exchanger
The heat exchanger is a part of the heater, separating the air from the fumes released from the fuel.
It is designed to make sure that users do not inhale the fumes from the fuel. If this part is dirty or damaged, it can lead to a burning smell when the user turns on the heater.
too much tank oil in the heat exchanger
If the heat exchanger has too much oil in it, this can be one of the reasons why users have a burning smell when user turn on the heater.
This is because the oil that remains there can catch fire and cause a burning smell while using the heater. To prevent this from happening, make sure that the oil levels in the heater are checked regularly.
quick and reliable service
The most common reasons users could be experiencing a burning smell when they turn on the heater are defective parts inside. When this happens, it is important to have technicians repair the heater as soon as possible. Air Docs offer quick and reliable service to all customers.
If users need help in AC maintenance and repair and better indoor air quality in Vero Beach, FL, and surrounding areas, contact Air Docs Heating & Cooling.
