icon Add as a preferred source Download PDF version

When the USA’s elite special operations forces needed a specialized heating solution they turned to Tempco, for help. Seal Team 4, located in Virginia Beach, VA, needed to heat the aluminum fuel tanks in their Mark 7 Go Fast Boats.

The aluminum fuel tanks held diesel fuel that needed to be kept warm when the boats were exposed to freezing temperatures during either cold weather deployment or during transportation via cargo plane.

Challenge

As temperatures drop to the freezing mark and below, diesel fuel is negatively affected. The paraffin wax within the fuel begins forming solid molecular bonds. These bonds become visible as the quantity increases, giving the fuel a hazy appearance.

Under normal conditions, the paraffin wax acts as a lubricant to maintain the fuel’s viscosity. As more wax solidifies over time, it can clog a fuel filter blocking the flow of fuel to the engine. As one can guess, the result is a starved engine that will not run. That is not acceptable when the Navy Seals are called to duty.

Silicone rubbers heaters

The heaters needed to be compact and easy to install as well as removable for storage when not in use

Tempco designed a pair of silicone rubbers heaters as a solution. The heaters needed to be compact and easy to install as well as removable for storage in custom cases when not in use. Additionally, they needed to stay below a specific temperature. The features of the flexible heater design include:

  • Factory vulcanizing to Stainless Steel plates - the SS plates could then be easily mounted to and removed from the aluminum fuel tanks.
  • Heaters were designed with a specific watt density to make sure the temperatures did not get too high.
  • Silicone sponge insulation was used to help force the heat towards the tank.
  • A standard electrical plug was used to make powering the unit easy and hassle-free.

The units worked out great and the Navy used several sets for the required boats. Tempco is a proud American manufacturer of electrical heating elements, temperature sensors, and controls and were was happy to do what to help solve a problem for the United States Armed Forces.

In case you missed it

Mitsubishi Electric's Call For Energy Reform In UK
Mitsubishi Electric's Call For Energy Reform In UK

Despite 80% of UK homeowners saying they care about climate change, heat pump adoption in UK homes remains critically low, with only 6% making the switch. According to Mitsubishi...

Midea Equipping Contractors To Seize On The Transition To Heat Pumps
Midea Equipping Contractors To Seize On The Transition To Heat Pumps

The HVAC market is in transition. Heat pumps are no longer niche, but are becoming the default replacement for both furnaces and central AC. Midea is responding to the new normal a...

Carrier Corporation Unveils New Coolant Distribution Unit (CDU) For Data Centers
Carrier Corporation Unveils New Coolant Distribution Unit (CDU) For Data Centers

The new Carrier Coolant Distribution Unit, part of the growing QuantumLeap portfolio of purpose-built data center solutions that extends from chip to chiller, is now available. Car...

vfd