Danfoss’ precautions keep the business running :

  • First and foremost, the company’s focus is on keeping everyone safe and they have taken prompt action all over the world to get the needed health and safety precautions in place to help ensure the wellbeing of all their colleagues. This is key to ensure that the company continue to operate and serve their customers.
  • They are following the different requirements by local authorities, and their contingency plans have been quickly put in place to minimize potential impact in their supply chain and delivery to customers.
  • Until now, the company has experienced only minor interruptions. However, they are very much aware that supply chains might be impacted by local and regional issues as the coronavirus continues to spread globally.
  • They know the coronavirus situation is developing day by day and its status and impact is very different from one country to another. Therefore, Danfoss is keeping in very close contact to their suppliers and logistics providers, and in all areas where possible, they are taking proactive steps to stay ahead of potential supply shortages.

Danfoss is still available to serve and support the customers

  • The company has, to a large extent, shifted to digital and online services, and many of the colleagues are now working from home to avoid large-group environments that the medical experts warn against in an effort to slow the spread of the coronavirus. This also goes for their customer service functions, but they are still available as always and eager to support the customer’s needs.
  • In Danfoss, they have a ban on all travel between countries, and they have decided to significantly limit their face-to-face meetings in general. They are always fully available – on the phone and online - ready to serve their customers and partners.
  • These are undoubtedly unprecedented times in the world, but, together, everyone will get through this period of adversity in the best possible manner. The company and its employees will focus on staying safe and remain committed to keeping the wheels turning to continue to serve and support their customers.
Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

Pandemic Spotlights Need To Balance Costs While Improving Air Quality In Schools
Pandemic Spotlights Need To Balance Costs While Improving Air Quality In Schools

Attitudes about indoor air quality need to change, especially given the current pandemic that forces people to spend most of their time indoors. But addressing the pandemic through increased ventilation and better indoor air quality can be expensive. For example, the Los Angeles Unified School District, the second-largest in the nation, has spent $6 million on HVAC upgrades and new air filters in response to the pandemic and expects to pay about $1.7 million a month for ongoing inspections and filter replacements. Updating & Improving HVAC Systems Updating HVAC systems to minimize virus spread has been an expensive proposition all around. Some school districts in California report the costs are insurmountable. Sometimes seeking to replace or update an HVAC system opens a can of worms: Electrical systems must be rewired, asbestos must be removed, and/or an expensive roof needs to be replaced. Schools in low-income areas are especially likely to be in poor condition, and unable to afford improvements. Some school districts have used money from the federal CARES Act – a $2 trillion federal economic package passed in March – to make ventilation improvements. Hope remains that additional state and/or federal money will be available, but funding is still likely to be inadequate. Airborne Transmission Study showed that some classrooms had air change rates below 0.5 changes per hour The airborne transmission was initially underplayed as a means of spreading the novel coronavirus. There was more emphasis on the dangers of touch during the early days of the pandemic. However, the airborne (aerosol) spread is now believed to make up about 75% of transmissions. A group of 239 scientists from around the world advocated more action to address aerosol spread in a July 2020 open letter to the World Health Organization (WHO). The concern is a global challenge. For example, a survey of 20 classrooms in the United Kingdom, carried out by National Air Quality Testing Services (NAQTS), revealed very low air change rates that could increase the risk of virus transmission. The study showed that some classrooms had air change rates below 0.5 changes per hour (3 to 5 changes per hour would be desirable). Even small increases in flow rate could reduce the risk of infection significantly. Raising airflows from zero to 100 cu m/hour cuts the risk by up to a third, according to NAQTS. Fresh Air Ventilation & Filtration The Scientific Advisory Group for Emergencies (SAGE) advised the UK Government last fall of a need to ensure undisrupted education for children of all ages. A critical part of keeping children in school is clear guidance and support packages, including better ventilation and air filtration, particularly through winter. The German government advises schools to open their windows for at least five minutes every hour Other countries can learn a lot about the value of opening windows to allow in more fresh air from the Germans. For years, Germans have habitually opened their windows twice a day, even in winter. In fact, “lüften,” or airing a room, is among the cheapest and most effective ways of decreasing the spread of the coronavirus. The German government advises schools to open their windows for at least five minutes every hour; for example, when classes are changing. Improving Indoor Air Quality Airing of rooms is a likely factor in the lower number of coronavirus cases reported in Germany compared to, say, the United Kingdom. In the end, improving indoor air quality involves some combination of letting in more fresh air, upgrading air filtration systems, and installing technologies such as UV light to kill pathogens. However, implementing these measures only mitigates the likelihood of contracting COVID-19. Some risk remains.

What Technologies And Trends Will Define HVAC In 2021?
What Technologies And Trends Will Define HVAC In 2021?

The pandemic of 2020 presented unique challenges to the HVAC market, and in many instances, responding to those challenges relied on technical innovation. It’s safe to say that the pandemic accelerated several technology trends, redirected others, and overall raised the stakes in the industry’s ongoing challenge to meet customer needs across a wide spectrum. But what comes now? We asked our Expert Panel Roundtable to weigh in on this question: What technologies and trends will define the HVAC industry in 2021?

Overcoming Engineering Challenges In Riser Design
Overcoming Engineering Challenges In Riser Design

How grooved solutions have been making contractors and engineers reimagine the way they construct risers in vertical buildings? Enter into the right pub, or head to a city’s museum or town hall, and you can often find a picture of how the surrounding area used to look. An image from twenty years ago and the difference isn’t too vast. Fifty years back and there’s a definite change. A picture from over a hundred years ago and it’s practically unrecognizable. And what’s the common theme running through these images? Cities are getting taller. As more people migrated to urban areas, developers saw the need to go higher. But with this comes its own unique set of challenges. How can the safety of ground floor be transferred to, in the most extreme case, level 163? Grooved mechanical pipe joining solutions When it comes to high-rise buildings, there are a number of potential challenges for a piping engineer To find out how grooved mechanical pipe joining solutions are helping developers & engineers go higher, we spoke to Matthew Strohm, Director of Product Development (Piping System Design) at Victaulic. When it comes to high-rise buildings, there are a number of potential challenges that a piping engineer will need to take into consideration, most of which relate to thermal movement and the resulting forces on the building. Other issues such as seismic activity and building creep (the natural movement of a building due to settlement) also need to be taken into account. Compensating for thermal expansion and contraction Specifically related to piping systems and subsequently, pipe joining solutions, is the unique problem of having to compensate for thermal expansion and contraction, while at the same time, accommodating for higher pressure. Change in pipe diameter is not an uncommon concern for engineers, however, providing a solution which could operate at a pressure gauge of 25 bars, or the fluctuating temperature of water, presents its own challenges. It’s with these issues in mind that engineers choose their joining solutions, which is why these are the very criteria we set our Victaulic pipe joining solutions against. Grooved vs. Traditional Pipe Joining For decades, the traditional solutions for joining pipes have been welding, threading or flanging. These are good solutions to choose from, but there is a distinct lack of flexibility in a solution that fuses or flanges system components together. This is where flexible grooved couplings come in. They are solutions that allow controlled linear and angular movement at each joint to accommodate not only for thermal expansion and contraction, but also building sway and creep. So how do flexible grooved couplings manage this? It’s essentially down to the design of their components. The dimensions of the pipe coupling housing key is narrower than the pipe groove, allowing room for movement. Furthermore, the width of the pipe coupling housing allows for pipe end separation, which in turn allows the grooved pipe joint to accommodate movement. Benefits of Grooved couplings There are many benefits of grooved couplings, with space-saving being a key advantage on projects, both large and small There are many benefits of grooved couplings, with space-saving being a key advantage on projects, both large and small. As many project managers and engineers know, saving on space can be the key to unlocking extra value above initial planning. Additionally, grooved couplings are perfectly placed to accommodate for piping movement, whereas welded joints that in their very nature are designed to be fixed in place, need to have an area of space to allow for a welded expansion loop or alternatively, enough space to allow the star-pattern tightening of a flanged flex connector. Saving time, money and labor Besides the savings on space, grooved connections offer contractors savings in three key areas: time, money and labor. The installation-ready design of Victaulic’s grooved couplings allow for an easier installation, meaning a process which might take 30 minutes through a welded solution for instance, can now take just five minutes. As any contractor will testify to, this is valuable time that can be used for other parts of the project. With a reduction in time comes savings in cost and labor. Naturally, less labor is used for the same job and in the case of grooved couplings, less skilled labor is required (in comparison to the high skill level needed for welded joints). It’s these aspects that will ultimately deliver contractors with valuable project savings. Grooved connections offer savings in three key areas: time, money and labor Mechanical riser solutions There are 3 ways to accommodate for thermal movement within risers using a grooved mechanical system: The first method is called top of riser free-floating method and involves installing rigid couplings on the riser and two flexible couplings on the horizontal adjacent piping at the top of the riser, which can reduce the need for riser clamps or other structural during installation and allows the system to move freely within the design tolerances. The second method involves working with grooved expansion loops that help to save up as much as 2/3rd of the size of welded U-shaped expansion loops and avoids forced welded pipe deflection. While welded expansion loops require eight welded joints to assemble, the forces exerted on the joint are far greater than those applied on a grooved expansion loop, and generate greater stress, which ultimately requires larger anchors and guides in order to direct the movement. The third method is working with grooved expansion joints instead of traditional in-line expansion joints, which typically have wear parts and manufacturer-recommended maintenance cycles of five years, which also poses problems due to riser accessibility once the construction is complete. Grooved expansion joints like the Victaulic Style 155 are maintenance-free for the life of the system. Importance of anchors In a system using only flexible joints, risers are installed with anchors at the top and bottom and the piping guided every other length to prevent angular deflection at the joints within the piping run. Anchors distribute the movement forces across the structure and also provide the important task of directing pipe movement. At the pipe anchor location, there will be no differential movement between the piping and the building structure, which forces the pipe to thermally expand or contract from that location. This allows the design engineer to control how and where the movement in a system occurs and to provide the best solution to accommodate that movement. A10 Grooved Riser Anchors upgraded A good manufacturer will always listen to customer demand, especially in an evolving market A good manufacturer will always listen to customer demand, especially in an evolving market. Off the back of strong feedback from contractors, Victaulic recently upgraded its A10 Grooved Riser Anchors to a standard product. With the primary functions of carrying the weights and forces that act downward to the base of the riser and connecting the riser to the rest of the structure, the anchor has been providing sturdy support for some of the tallest buildings around the world. Future trends for high-rise buildings One trend already taking place, and I expect to continue, is contractors bringing riser experts into the project at an earlier stage. It just seems to make logistical sense to operate in this fashion. it’s a more efficient use of time to collaborate early in the process. I believe contractors and engineers will seek assistance from companies such as us to help design blueprints together, working in tandem to produce the right solution. Vertical buildings are on the rise. For generations, people have been moving to urban areas, putting greater demand on housing residents and employees. Through the use of grooved coupling solutions as an alternative to traditional methods, contractors can benefit from greater flexibility, reliability, ease of installation and ultimately and most importantly, speed of the installation process.

vfd