FläktGroup 63JMv/20/4/6/10 JMv Aerofoil Axial Flow Fan

Technical Specification

Features:

Make: FläktGroup
Model code: 63JMv/20/4/6/10
Fan Type: Axial Fans
Airflow Capacity: Up to 227,160 m3/h
Pressure Rating: Up to 1650 Pa

Additional info:

Available in 14 diameters, 315 to 1400mm Volumes up to 227,160 m3/h (63.1 m3/s) Static pressures up to 1650 Pa Fan efficiencies of up 84.8% deliver low running costs (reduced by 44.5%) and enhanced SFP values Improved fan efficiencies reduce operational life time carbon foot print by up to 624 Tonnes Fans are tested to ISO5801, BS848 and EN12101-3:2015 (High Temperature) Suitable for Standard temperature, 200°C/2, 250°C/2, 300°C/2 and 400°C/2 smoke extraction Fully compliant with ErP regulation 327/2011 (2nd Tier). Also exceeds expected future energy efficient targets Fan casings are hot dip galvanized to offer enhanced corrosion resistance Fully cased design makes installation quick, simple and cost effective Single and two speed motors are available in 50Hz and 60Hz variants. Motor protection IP55 Low installed noise levels

Contact manufacturer Contact manufacturer

Datasheet Datasheet

Make	FläktGroup
Manufacturer	FläktGroup Holding GmbH
Category	Air Ventilation>Fans and Blowers
Model code	63JMv/20/4/6/10
Fan Type	Axial Fans
Airflow Capacity	Up to 227,160 m3/h
Pressure Rating	Up to 1650 Pa
Speed	1340 RPM
Energy efficient	Yes
Material	Aluminum
Certifications and Standards	ErP regulation 327/2011 (2nd Tier)
Additional info	Available in 14 diameters, 315 to 1400mm Volumes up to 227,160 m³/h (63.1 m³/s) Static pressures up to 1650 Pa Fan efficiencies of up 84.8% deliver low running costs (reduced by 44.5%) and enhanced SFP values Improved fan efficiencies reduce operational life time carbon foot print by up to 624 Tonnes Fans are tested to ISO5801, BS848 and EN12101-3:2015 (High Temperature) Suitable for Standard temperature, 200°C/2, 250°C/2, 300°C/2 and 400°C/2 smoke extraction Fully compliant with ErP regulation 327/2011 (2^nd Tier). Also exceeds expected future energy efficient targets Fan casings are hot dip galvanized to offer enhanced corrosion resistance Fully cased design makes installation quick, simple and cost effective Single and two speed motors are available in 50Hz and 60Hz variants. Motor protection IP55 Low installed noise levels
Download PDF version Download PDF version