American Coolair Corporation - Experts & Thought Leaders

American Coolair has developed a line of electrically commutated Energy Saver motor powered fans. Energy Saver motors allow for precise control of air movement systems, while operating at a fraction of the cost of conventional permanent split capacitor (PSC) direct drive motors and even belt-drive units. With ability to control the motor manually, and an option to automate control based on system performance, American Coolair’s Energy Saver motors are a compliment to today’s lean building design. Line of ESM fans The line of ESM fans includes CRDA Direct Drive Domed Centrifugal Power Roof Ventilators, CUDA Direct Drive Upblast Centrifugal Power Roof Ventilators, SQDA Direct Drive Centrifugal In-Line Duct Fan,CWDA Direct Drive Centrifugal Wall Fans, CDU Direct Drive Wall Fans, and CDC Direct Drive Wall Fans. Not only do Energy Saver motors have a higher efficiency, they maintain that efficiency even as the motor load is reduced with slower fan speeds. Energy Saver motor Centrifugal and axial units provide the versatility and low maintenance requirements and fan efficiencies Testing has shown that at 75 percent of the nameplate motor speed, the Energy Saver motor provides for a 40 percent energy savings over a comparable belt-drive unit, and a 60 percent savings over a PSC motor. At 50 percent of full speed, a 60 percent savings over belt drives, and an 80 percent savings over PSC motors is realized. The electrically commutated Energy Saver motor is a brushless DC motor. The internal electronics of the motor convert standard single-phase AC line power into DC power, without the need for any external inverter or variable frequency drive device. Centrifugal and axial units Centrifugal and axial units powered by Energy Saver motors provide the versatility and low maintenance requirements and fan efficiencies. All Energy Saver motors can be controlled down to 20 percent of the nameplate speed. This means a 1,750 RPM motor can operate at any speed between 350 and 1,750 RPM. That’s a 60 percent greater RPM range than what is capable for a PSC motor. Engineered to exacting standards, Energy Saver motors will provide you with years of trouble-free, economical service. Line of products Energy Saver motors are currently available in 1/4 HP, 1/2 HP, and 1 HP. American Coolair is developing additional sizes and voltages. Founded in 1928, American Coolair Corporation is a manufacturer of ventilation and evaporative cooling systems for the poultry, swine, dairy, greenhouse, and golf industries. American Coolair also produces axial, centrifugal, high temperature, and mixed flow fans for commercial, industrial, and restaurant applications.

American Coolair has named Bobby Graves Jr. as a Sales Representative in the Agriculture Sales Division. In this role, Graves will work with American Coolair customers in the greenhouse, poultry, and dairy industries. Experience and qualification  Bobby Graves Jr. has been with the company since 2017, starting as an Inventory Clerk while attending college. He has worked in the production and assembly departments, as well as in the onsite research and development facility to learn the company from the ground up. A 2020 the University of North Florida graduate, Bobby Graves Jr. is an avid outdoorsman and spends most weekends either hunting deer in the fall, fishing in the spring and summer, or just spending time on the St. John’s River. He also likes playing music and recording music for fun.

American Coolair Corp. introduces its mixed flow fan with a direct drive motor. The MXFD combines the high volume flow capabilities of an axial fan and the pressure capabilities of a centrifugal fan. Designed to meet ducted fan needs both economically and efficiently, these fans operate reliably in most environments, including contaminated air. Combined with a VFD, variable frequency drive, the speed of the fan can be changed to match the performance required. less maintenance, long life The MXFD’s housing and motor supports are made of heavy gauge steel plate for maximum strength and durability. The mixed-flow wheel is heavy gauge welded steel. Both the housing and wheel are coated with epoxy to provide a protective coating that is rated excellent for hardness, impact resistance, adhesion, and chemical resistance. Direct-driven models require less maintenance, offer longer operating life, and reduce operating costs. The fans are available in 18-43 inch models.