International news

DENSO, a mobility supplier, has signed a long-term agreement with aerospace pioneer Honeywell establishing an alliance focused on electric propulsion units to meet new aerospace needs. Drawing from their automotive and aerospace backgrounds, the companies will develop and manufacture electric propulsion systems for aircraft, initially prioritizing the urban air mobility (UAM) segment with a focus on air taxis and delivery vehicles. electric propulsion systems DENSO and Honeywell are in advanc...

DENSO, a globally renowned mobility supplier, announced its global year-end financial results for its fiscal year ending March 31, 2021. DENSO’s committed to sharing actions it has taken to realize its Long-term Policy 2030, the company’s vision for enriching mobility and achieving sustainability and peace-of-mind for all. This past year, DENSO introduced Reborn 21, an initiative to speed up reform of DENSO’s operations and accelerate how it reacts to market changes. DEN...

The Viessmann Group (“Viessmann”) - one of the world's pioneer manufacturers of climate solutions - has acquired a 34.3 percent stake in the Value Added Engineering Group (“VAE”). VAE is one of Australia’s pioneer HVAC design, installation and service companies and is headquartered in Brisbane, Australia. With this partnership, Viessmann, a family-owned company with its headquarters in Allendorf Germany, is now active on the Australian continent for the first...

DENSO Corporation announced it has begun testing a CO2 circulation plant at its Anjo Plant’s Electrification Innovation Center. The new plant is a demonstration facility designed to capture and recycle CO2, a capability that supports DENSO’s larger efforts to eliminate CO2 emissions from its facilities. sustainability DENSO for years has been committed to sustainability. Out of that commitment, it recently implemented growth strategies in its focus areas of "Green" and "Peace of M...

DENSO Corporation (DENSO) and KDDI Corporation (KDDI) have begun researching 5G’s use in automated driving to achieve safe and secure mobility, free from traffic accidents and congestion. In the verification project, DENSO and KDDI will build a 5G environment in a test course at Global R&D Tokyo, Haneda, a research and development center for automated driving operated by DENSO. The two companies will verify driver assistance technologies in automated driving vehicles using high-defini...

DENSO Corporation announced it will transfer ownership of its Higashi Hiroshima Plant to its subsidiary - DENSO Kyushu on April 1, 2021. The plant will be renamed DENSO Kyushu Higashi Hiroshima Plant. The DENSO Group has long manufactured compact motors for automotive wiper systems and washer systems at the Higashi Hiroshima Plant. DENSO Kyushu, which has a Kitakyushu Plant and Hiroshima Plant nearby that manufacture thermal system products, diesel fuel injection systems and components, and gas...

DENSO, a pioneering mobility supplier, announced a partnership with U.S. LiDAR and perception systems company, Aeva, to develop next-generation sensing and perception systems. Together, the companies will advance Frequency Modulated Continuous Wave (FMCW) LiDAR, a groundbreaking solution that measures velocity, in addition to depth and reflectivity, and bring it to the mass vehicle market. Advanced driver-assistance systems At present, most LiDAR systems use the Time of Flight (TOF) method to...

DENSO Corporation announced it has begun mass production of its latest model of booster power module equipped with high-quality silicon carbide (SiC) power semiconductors, as part of its efforts to achieve a low-carbon society. This product is used in Toyota’s new Mirai model, which entered the market on December 9, 2020. DENSO has developed its REVOSIC® technology for the purpose of applying SiC power semiconductors (diodes and transistors) to in-vehicle applications. Use of SiC for...

DENSO, a pioneering mobility supplier, announced it has invested again in mobility platform developer Ridecell as part of the company’s Series C financing round. DENSO first invested in Ridecell, which helps commercial fleets digitally transform their operations, in 2017. DENSO’s investments strengthen ties between the companies and allow each to accelerate advances in connected solutions for mobility providers. These advancements are particularly useful to fleet operators look...

DENSO, a globally renowned mobility supplier, announced it has taken a stake in Envoy Technologies, an electric vehicle (EV) startup based in Culver City, California, that offers mobility services to the commercial real estate (CRE) industry. Through the investment, DENSO aims to create new revenue streams by offering the benefits of Mobility-as-a-Service (MaaS) to businesses, helping them move employees, customers and things more efficiently and safely. Onsite mobility services Envoy's Mobil...

Michinori Holdings, Inc. (Michinori HD), Aizu Bus Co., Ltd. (Aizu Bus), DENSO Corporation (DENSO), ABB Bailey Japan Ltd. (ABB Bailey), DAIHEN Corporation (DAIHEN), and Deloitte Tohmatsu Financial Advisory LLC (Deloitte Tohmatsu) were awarded a contract for the R&D and Demonstration Project Toward Realization of Logistics MaaS (Mobility as a Service) Using Commercial Vehicles financed by the National Institute of Advanced Industrial Science and Technology in FY2020. The demonstration project...

DENSO Corporation and DENSO WAVE Incorporated announced that the QR Code, which DENSO invented, has received the prestigious IEEE Milestone award from the Institute of Electrical and Electronics Engineers (IEEE). IEEE recognized the QR Code for helping to improve the manufacturing and management of companies around the world and for gaining ubiquity worldwide as a critical information-sharing tool in a variety of applications, such as electronic payments. IEEE Milestone IEEE Milestone is an a...

DENSO Corporation announced it has developed a Factory-IoT Platform that connects 130 production factories worldwide with information technology (IT) and Internet of Things (IoT) technologies, based on the concept of 'as if under one roof'. This is the first in-house development of a cloud-native platform using open-source software in the automotive supplier industry. The newly developed platform stores data collected from a variety of equipment at various production sites in a single...

Ajax Systems, the developer behind the most award-winning wireless alarm in Europe, has hired a UK Sales Leader to strengthen its presence in the UK market and expand the local team. Steve Norman is a security industry veteran. For the last 20 years, he was working for major international manufacturers from the US and China, and a distribution and integration company in the UK — this experience lets Steve understand the industry from all sectors. Active development and growth “S...

DENSO Corporation has announced that its smartphone application - NaviBridge is compatible with more than 1,000 car navigation systems. Through NaviBridge, a user can share searched locations on their smartphone with car navigation systems through a single touch, delivering them quick and easy access to important directions and allowing them to focus on what matters most: the road ahead. It comes in iOS and Android versions; both are free. Compatibility DENSO began developing NaviBridge for i...

DENSO Corporation announced it has established the Pittsburgh Innovation Lab, a new U.S. R&D center designed to strengthen open innovation and enhance technology development that enables automated driving. DENSO began operations in Pittsburgh in July 2020. automated driving technologies DENSO’s development of automated driving technologies stems from its broader mission to offer safe and secure means of transportation for all people globally. At the Pittsburgh Innovation Lab, the co...

DENSO Corporation expressed its deepest sympathy to all those affected by the rainstorm disaster in Japan, in July 2020. DENSO Group companies are donating 3,000,000 yen (approximately US$28,000) and 500,000 yen (approximately US$4,600) from the DENSO Group HEARTFUL Fund to the Central Community Chest of Japan, to support the recovery and rebuilding efforts.

DENSO Corporation has established 'Global R&D Tokyo, Haneda' as a new base for R&D on automated driving and related technologies. It is located in Haneda Innovation City, which was opened in 2020. Global R&D Tokyo In April 2018, DENSO set up Global R&D Tokyo near Shinagawa Station, to conduct R&D mainly on automated driving. The newly established Global R&D Tokyo, Haneda will have an office to design and develop automated driving technology, an automotive service buildi...

DENSO announced it has opened an Electrification Innovation Center at its plant in Anjo, Aichi, Japan. The move supports the company’s aggressive development and production of electrified automotive products, systems, and technologies. electric vehicles DENSO has long developed and produced key products for electric vehicles, including inverters and motor generators used in hybrid vehicles and battery packs in mild hybrids, also known as stop-start technology. As part of its efforts to...

DENSO Corporation (DENSO) and Certhon Group (Certhon) announced that they established on May 29, 2020, DENSO AgriTech Solutions, Inc., a sales company focused on providing innovative horticulture solutions. agricultural products The joint venture will offer customers DENSO’s agricultural products, such as the Profarm T-cube, and Certhon’s horticulture products and services. Moreover, it will provide next-generation turn-key horticulture solutions, including agronomy consulting and...

DENSO Corporation and Global Mobility Service Inc. (GMS) announced they will support the delivery of polymerase chain reaction (PCR) testing kits, which detect COVID-19, and the raw materials for the kits to medical institutions, testing organizations, and pharmaceutical companies in Indonesia. PCR test kits Healthcare workers in Indonesia have relied on imported PCR test kits to trace and fight the virus, but growing demand has caused a shortage of these critical tests. Under the leadership...

AgriD Inc., which DENSO Corporation and Asai Nursery, Inc., jointly established, has started shipping cherry tomatoes cultivated at its newly built greenhouse, one of the largest in Japan, in Inabe City, Mie Prefecture. Japanese agriculture faces severe labor shortages due to the decreasing number and aging of farmers. Smart farming based on robot technology and ICT holds the potential to help farmers compensate for lost labor, while achieving high-quality agricultural production. AgriD AgriD...

DENSO Corporation (DENSO), the second largest advanced automotive technology supplier in the world, has announced its investment in Certhon Group (Certhon), operating mainly in Europe and the United States, to expand the horticulture business in the global market. DENSO and Certhon will collaborate to develop and provide greenhouse solutions. agricultural production system While food demand increases as the global population continues to grow, the number of the agricultural population is decr...

A group of installers from the UK and Ireland recently visited Panasonic’s factory in Pilsen, Czech Republic, to see the company’s latest heat pump production facility. The factory started production of Panasonic’s Aquarea Air Source Heat Pumps in October 2018 in order to help meet the growing demand within Europe for renewable heating technologies and to ensure shorter lead times, as it works towards a greener and more sustainable future. “The visit to the factory was v...

DENSO Corporation expresses its deepest sympathy to all those who have been affected by the outbreak of the COVID-19 (Coronavirus) pandemic. DENSO Group companies, including DENSO (CHINA) INVESTMENT, are donating a one million CNY (approximately US$145,000) through the Red Cross Society of China to support the recovery.

NSITEXE, Inc., a group company of DENSO Corporation that develops and sells high-performance semiconductor IPs, has completed the development of the DR1000C, the first data flow processor (DFP) product, and started selling the product today. NSITEXE will exhibit the DR1000C at the 12th Automotive World - International Automotive Electronics Technology Expo to be held at the Tokyo International Exhibition Center (Tokyo Big Sight) from Wednesday, January 15 to Friday, January 17, 2020 (booth No....

DENSO Corporation and Qualcomm Technologies, Inc., a subsidiary of Qualcomm Incorporated announced the companies’ joint efforts in developing next-generation cockpit systems. In recent years, the amount of information provided by a vehicle to the driver has increased due to advanced driver assistance functions using cameras and sensors, as well as various entertainment functions. human-machine interfaces With these opportunities for vehicle-driver communication, human-machine interfaces...

DENSO Corporation announced that it has taken a stake in PiNTeam Holding GmbH, a German company highly evaluated for its in-vehicle embedded software technology deployed primarily in Europe. With this equity stake, DENSO will accelerate the development of basic software that controls in-vehicle electronic control units (ECUs). Vehicles are becoming increasingly reliant on complex, embedded software due to growing demands for vehicle performance, especially as new systems in advanced driver assi...

On December 16, 2019, DENSO gladly announced the company’s 70th anniversary. DENSO CORPORATION was born in 1949 as “NIPPONDENSO CO., LTD.” in Kariya City of Aichi Prefecture. The company has continued to evolve and perfect its Monozukuri processes, overcoming many difficulties. human-centric mobility society To contribute to the realization of a new, human-centric mobility society that makes everyone happy and to continue to be a company that creates new value. That is...

DENSO Corporation announced that it will expand the plant of DENSO Hokkaido Corporation, one of its group companies, as part of its efforts to increase production of semiconductor sensors, enhance its domestic production system and boost DENSO group’s competitiveness. DENSO will invest about 11 billion yen by 2025 to complete the expansion and increase production. Construction is scheduled to start in July 2020 and to be completed in June 2021. Production is planned to start in stages in...