Bryant Oil Furnaces  (25)

With ongoing efforts from governments across the globe to reduce carbon emissions and with an ever greater focus on sustainability, it is vital that the HVAC sector does its part in becoming more environmentally conscious. And, while there have been steps to become more sustainable, there is a huge amount that still needs to be done to make sure that many of the targets that have been set are attainable. In buildings, both large and small, industrial heating accounts for roughly two thirds of industrial energy demand and around a fifth of global energy consumption. Figures like this show the need to have efficient and environmentally-friendly HVAC equipment in place to make the crucial steps towards reducing the contributions these systems make to our carbon footprint. High energy consumption in construction sector A 2019 report by The International Environment Agency (IEA) showed that the buildings and construction sectors combined were responsible for over 30% of global energy consumption and nearly 40% of carbon emissions. This is indicative of the steps the sector needs to take to play its role in a more eco-friendly society, some of which are already underway. However, much more needs to be done if the UK is to reach its goal of reaching net zero carbon emissions by 2050. As we envisage what a post-COVID world might look like, businesses and governments are continuing to put sustainability and lower carbon emissions at the forefront of their planning and the HVAC sector is certainly no exception. But with change in the sector a daunting prospect, decision-makers often don’t know where to start. Smart Technology use in HVAC systems Smart HVAC uses sensors that integrate with a building’s automation system With the constant growth and greater deployment of smart technologies within the HVAC sector, this is certainly a way that systems can become more efficient. Smart HVAC uses sensors that integrate with a building’s automation system. These sensors then collect information about conditions throughout the building. Heat waves are now a far more common occurrence in the United Kingdom. The Met Office estimates they are up to 30 times more likely and will be a bi-annual occurrence by 2050. It is important that any uptake in HVAC usage doesn’t lead to a drastic increase in emission generation. This is one of the areas where smart systems will become crucial. Many scientists have been unequivocal in their sentiment that heat waves are a cause of greater emissions and expect temperature records in the UK and Europe to be broken more regularly, so sites will need to be equipped to handle these conditions. Regulating temperature with hand-held devices With wireless systems now much more commonplace, temperatures can be controlled easily from hand-held devices. With these new technologies, those managing the systems can also benefit from remote monitoring and maintenance, reducing the need to travel to the site for yet another environmental incentive. To accompany the smart systems, equipment including smart thermostats can be installed to maximize HVAC efficiency. Other smart systems available to businesses include smart furnaces and air conditioning units that are far easier to operate than their traditional counterparts. Reducing unnecessary ventilation While global temperatures continue to rise, air conditioning usage has increased and has contributed to greater levels of energy usage. A huge amount of needless emissions are generated by unnecessary ventilation, contributing heavily to heat loss and overall energy wastage. Recirculation of air is a traditionally lower energy cost method of retaining heat and keeping emissions low, however, we must be mindful of the risks associated with recirculating air. The risk of circulating diseases is negated somewhat with heat recovery ventilation, which both removes the risk of disease spreading and improves energy consumption. Efficiency performance of new AC units Air conditioning units in particular contribute significantly to a building’s energy consumption Air conditioning units in particular contribute significantly to a building’s energy consumption, equating to 10% of the UK’s electricity consumption and as such it is important that we bear in mind ways to counteract the emissions this creates. Global energy demand for air conditioning units is expected to triple by 2050, as temperatures continue to rise year on year. The efficiency performance of new air conditioning units will be the key, when it comes to ensuring that escalating demand does not equate to greater emissions. Another issue for suppliers and manufacturers to address is differing rates of consumption for AC units in different countries, with units sold in Japan and the EU typically more efficient than those found in China and the US. Modularization Modular HVACs have also become increasingly popular in recent years. Modular HVACs are responsible for heating, cooling and distributing air through an entire building, with their increase in popularity largely down to their greater levels of energy efficiency, cost effectiveness, flexibility and substantial ease of installation and maintenance. Modular HVACs can be tailored specifically for workspaces and they often allow work to be done on the systems without disturbing the workforce, achieved primarily through rooftop placement. Commercial workspaces are larger and often require differing needs to residential properties and can cater to a wide range of the specific requirements of work and commercial spaces. As we strive for lower carbon emissions, it seems that this trend will continue and will become a key area in reducing emissions that HVACs have traditionally generated. System maintenance and training To meet government and industry requirements, many new buildings will require HVAC systems that can be maintained simply in order to perform in a more energy efficient way. Many companies are looking at ways to become climate neutral and significantly reduce their footprint Many companies are looking at ways to become climate neutral and significantly reduce their footprint. Companies are following the likes of German-based company, Wilo Group, who have announced they are committing to sustainable manufacturing by developing a new carbon neutral plant and HQ in the next few years. Lowering carbon footprint As we continue to move towards an ever more environmentally conscious society, it will be of paramount importance for companies, governments and the public to think about ways in which we can lower carbon emissions. Smart technologies will certainly be at the forefront of this, negating many needless journeys and making it easier for industries to adjust settings and tackle issues remotely. Greater levels of training will help equip us with the tools to make sure we are best placed to reduce emissions and be more sustainable as a result. While the steps outlined above do show some progress and measures we can take, there is far more that we can do as a sector to significantly reduce HVAC’s carbon footprint and once we have moved beyond the impact of the COVID-19 pandemic, this will surely be at the front of industry leader minds.

As the UK continues to battle through the coronavirus crisis, HVAC business owners and installers can be putting some of their enforced downtime to good use. This period of subdued trading is a rare opportunity to get into better shape for when economic activity picks up. One way of doing this is by sharpening the focus on markets which promise strong growth – and few markets are growing faster than that for heat pumps.   The potential here is huge. Some 28,000 heat pumps are currently installed in the UK every year, and before the pandemic this number was rising annually at a rate of 15-30%. That equates to sales doubling every three to five years. New-builds account for the majority of those sales, but 30% are retrofits, and about 30% of those retrofits are in private residences. This means there’s a big opportunity for doing conversions from oil boilers to heat pumps at rural homes not connected to the gas grid. The ‘New Normal’ and Heat Pumps It is only realistic, of course, to expect a lingering dip in HVAC sales of all kinds, including heat pumps, until the post-pandemic world gets back on its feet. But when we do turn the corner into the ‘new normal’, heat pump sales will again climb strongly. One reason for this is consumer demand, the other is government policy. End-users are now increasingly aware of the dangers and disruptions threatened by carbon emissions and climate change – informally known as ‘the Blue Planet Effect’ – and more are being guided by their consciences to make environmentally-responsible heating choices. An Expected Spike In Demand Many end-users are also encouraged by the prospect of receiving payments from the government through the Domestic RHI tariff. When we do turn the corner into the ‘new normal’, heat pump sales will climb strongly If RHI tariffs are the carrot, however, the government is also going to wield a big stick. The Chancellor’s spring statement last year dropped the bombshell that low-carbon heating systems, not fossil-fuel heating, should be installed in all new homes built after 2025. Though this policy might perhaps get slightly delayed and diluted, there can be no doubting that radical change is on the way.           With all this in the pipeline, the industry should be preparing now to cope with the increased demand. But there’s some way to go: of the UK’s 120,000 registered gas engineers, merely 600 or so are MCS-registered to install heat pumps. Many more will be needed. MCS Certification Some installers are already recognizing this opportunity. Some 28,000 heat pumps are currently installed in the UK every year, and before the pandemic this number was rising annually at a rate of 15-30% This is evident in the heightened level of interest in the one-day introductory heat pump courses run nationwide by the Viessmann Academy. These courses provide a useful overview of what heat pump installations involve, helping participants decide whether or not they would like to go on to qualify with the MCS quality assurance scheme. This is a crucial decision, because having MCS certification is an obligation when installing equipment eligible for Domestic RHI payments. Some course participants decide to take the next step to MCS certification straight away, others decide to wait a while – but standing still in a fast-moving market can mean getting left behind! F-Gas Certification So what else must HVAC businesses and installers consider about heat pumps, in order to stay ahead of the game? In addition to MCS certification, F-Gas certification is also necessary when split air source heat pumps are installed. This is because the outdoor and indoor units have to be connected on-site with refrigerant pipework. Some installers choose to get F-Gas certified themselves, others sub-contract this part of the job to someone who’s suitably qualified. Of the UK’s 120,000 registered gas engineers, merely 600 or so are MCS-registered to install heat pumps It is possible to sidestep this need, however, when it is appropriate to install a monobloc heat pump – and the widening choice and affordability of monobloc designs is making them appropriate for a wider range of properties. A good example of this is Viessmann’s new Vitocal 100-A, an outdoors unit which has no need for a complementary indoor unit and is also easy to install because most components are integrated in the unit. New, compact and affordable air source heat pumps such as this, offering much-needed space-saving solutions for urban homes, are another reason why the heat pump market will boom. The Challenges Of Heat Pump Installation Though technological advances are making things easier, installing a heat pump isn’t ever going to be quite as straightforward as replacing an old boiler with a new one. Before starting an installation, first it is necessary to assess whether a heat pump is suitable for the property. This means checking that the property is well-enough insulated; checking the existing system’s radiators, which may need supplementing or replacing with bigger radiators or underfloor heating because of the lower flow temperatures of a heat pump system; and calculating the required size of the heat pump according to the building’s heat loss (and not including hot water demand). This period of subdued trading is a rare opportunity to get into better shape for when economic activity picks up At the installation stage itself, much of the work will be familiar to boiler installers, though weather compensating controls are obligatory for all MCS-approved work and as part of building regulations Part L. It’s also important to note that planning permission requires minimum distances between the heat pump’s outdoor unit, the plot’s borders, and neighboring properties. If this seems complicated, it doesn’t have to be: some heat pump manufacturers provide a calculator to simplify the task. Now Is The Time To Be Proactive Just as installers need a little time to assess whether a property should switch from a boiler to a heat pump, end-users also need a little thinking time, to consider adopting a technology new to them. By being proactive, HVAC businesses and installers can reap what they sow When customers get in touch because their existing boiler has broken down, the pressure for a quick fix can rule this out. But right now, when many of us have time on our hands, there’s the chance to inform customers of alternative heating solutions before their boiler needs replacing. Taking such pre-emptive action, by emailing information or mailing leaflets to customers, does require a little effort, but at least now there’s the time to do it. We are heading into a new era which will see boiler sales decline while heat pump sales rise. By making preparations for these profound changes, and by being proactive, HVAC businesses and installers can reap what they sow.

Peterman Brothers of Greenwood, Indiana has been named the 2021 Bryant Dealer of the Year, the highest honor a Bryant dealer can receive. Each year, this award recognizes the company whose hard work, expertise and business acumen have helped them to stand out as a leader in the industry. Bryant, a pioneering supplier of heating, ventilating, and air conditioning (HVAC) equipment, is a part of Carrier Global Corporation, the pioneering global provider of healthy, safe and sustainable building and cold chain solutions. “Being named as the 2021 Bryant Dealer of the Year means that we are doing things the right way,” said Chad Peterman, Owner and President, Peterman Brothers. “It is not what we do, but how we do it. We are committed to providing our people and customers with the best customer experience possible.”   Bryant Medal of Excellence winner   Peterman Brothers has been solving plumbing, heating, and cooling issues of the central Indiana community since 1986 when Pete Peterman started the company in his garage. Since its humble beginnings, the company has grown to employ over 300 people today. Two of those employees include Pete's sons, Chad and Tyler. Both grew up around the business and have taken on numerous responsibilities.   Chad is the oldest and in his role as Owner and President, he is responsible for creating and executing the company’s vision and long-term strategy. Chad’s younger brother, Tyler, oversees all install operations. Peterman is now a complete family affair with all the Petermans involved in the day-to-day operations of the company. In addition, Peterman Brothers is a two-time Bryant Medal of Excellence winner.   Bryant Factory Authorized Dealers “Bryant dealers continue to raise the bar in our industry and are among the best in the business,” said Justin Keppy, President, NA Residential & Light Commercial, Carrier. “Our 2021 Dealer of the Year, Peterman Brothers, exemplifies the values and commitment that the Bryant brand has come to represent in its more than 115-year history. Its entire team embodies all that is necessary to run a successful business, and the company serves as an example to the industry for how an organization should treat its customers and the community in which it operates.” Bryant selected its 2021 Dealer of the Year from 22 Medal of Excellence winners, comprised of Bryant Factory Authorized Dealers throughout North America. The candidates were judged on overall sales growth, high-efficiency and indoor air quality equipment sales, customer satisfaction and participation in dealer programs and promotions.

Bryant has launched the new Bryant Home app, which provides homeowners with an improved experience managing their Evolution™ System. This replacement for the MyEvolution Connex app, which is available now in the Apple® App Store® and Google Play® store, provides an enhanced homeowner experience, improved functionality and increased connectivity performance between the mobile device and home comfort system.   Bryant, a pioneering supplier of heating, ventilating, and air conditioning (HVAC) equipment, is a part of Carrier Global Corporation, the pioneering global provider of healthy, safe and sustainable building and cold chain solutions. While the Bryant Home app has a new look and improved performance, it still includes many of the features and benefits homeowners were accustomed to with the previous MyEvolution Connex app. Homeowners will be able to control their entire advanced home comfort system to precisely manage the temperature, humidity and equipment efficiency.1 In addition, homeowners will be able to learn more about the outdoor air quality around their home, including the air quality index and the pollutant levels in the atmosphere. Bryant Home app The new Bryant Home app runs on a Carrier IO platform, which provides a solid backend and cloud platform to build robust IoT applications. This app represents the latest step in Carrier’s digital transformation journey as its residential business reinvents its holistic digital footprint. “We’re proud to introduce the Bryant Home app to residential customers,” said Gundeep Singh, Executive Director, Digital and Analytics, NA Residential & Light Commercial, Carrier.   “Homeowners will enjoy the enhanced performance that better allows them to conveniently manage their home comfort settings from anywhere. This is the next progression in our digital transformation and we look forward to offering homeowners a new level of functionality as we continue to add new features and product compatibility.”

Bryant Heating & Cooling Systems (Bryant) launched an updated zoning sensor to be used with its flagship Evolution Zoning System. The sensor provides homeowners with a wall control featuring a new, contemporary design, with the ability to control an individual zone in the home’s Evolution zoning system. Bryant, an international supplier of heating, ventilating, and air conditioning (HVAC) equipment, is a part of Carrier Global Corporation, a renowned global provider of healthy, safe and sustainable building, and cold chain solutions. Smart sensor The new look of the smart sensor also mimics the look of the Evolution Connex Control The new smart sensor was designed with the home owner in mind. Smaller than the previous generation of sensors, the sensor features a touchscreen with an updated look and feel that blends easily into the décor of many homes better than ever before. The new look of the smart sensor also mimics the look of the Evolution Connex Control, so as to help maintain a uniform appearance throughout the house. Evolution Zoning System In addition, the new smart sensors highlight the innovation behind the Evolution Zoning System, by providing an easy-to-read temperature display and intuitive controls. Homeowners also can adjust the fan and hold settings for each zone, as well as monitor the humidity levels and outdoor temperature. “The new smart sensors offer a sleek new look for our homeowners, with the functionality that is expected with the Evolution System,” said Frank David, Product Manager, Residential Thermostats and Controls at Carrier Corporation. Frank David adds, “The new touch-screen design will resonate with homeowners as it echoes many contemporary device interfaces. In addition, each sensor is smaller than previous generations, so they will be less intrusive to the home décor.”