Viessmann has designed and developed a new modular, airtight intensive care unit (ICU), which could make a fundamental contribution to the care of seriously ill COVID-19 patients.

The mobile, climate-controlled ICU builds on expertise within Viessmann’s Refrigeration Solutions division, which manufactures cold rooms with superior hygiene properties for a range of commercial applications.

Thanks to their prefabricated and modular design, the one or two-patient portable ICUs can be transported in a 40ft container and set up in under three days. They can be used both indoors, for example in exhibition halls or sports arenas, and outdoors, under appropriate cover.

Patient treatment from all four sides

Suitable for use in temperatures of 2-40°C but it can be adjusted to operate in any conditions

The units consist of an outer chamber and airtight inner chamber, each made of 100 mm polyurethane (PU) cleanroom panels, which are SmartProtec® antimicrobial powder coated and insulated to prevent energy loss.

The outer shell of the unit is 3.2m x 3m x 7.2m (w/h/l), while the patient’s chamber is 2.6m x 2.5m x 4.2m. These dimensions are designed to allow the treatment team to reach the patient from all four sides. To avoid pressure drop and cross contamination, the entrance door to the patient's room is interlocked, as per an approved layout from the German Cleanroom Institut.

The isolation chamber has a negative pressure of -15 Pa, as is common for the control of airborne infection in the care of patients with very contagious diseases. This is managed by a pressure sensor, as well as active pressure control and display. For immunosuppressed patients, pressure can be adjusted between +15 to +30 Pa.

Highest air quality above patient bed

Each unit features a plenum integrated air-conditioning unit for temperature control and recirculation, with separate fans for air supply and exhaust air. The design is suitable for use in temperatures of 2-40°C but it can be adjusted to operate in any conditions.

The velocity can be set according to the needs and comfort of the patient between 0.1-0.15 meters per second

The recirculation of air flow is undertaken by two high efficiency particulate air (HEPA) H14 grade filter fan units, designed to achieve the highest levels of air quality, located above the patient’s bed. The velocity can be set according to the needs and comfort of the patient, between 0.1-0.15 meters per second (m/s).

The estimated grade of air quality in the bed area meets the ISO 7 or EN ISO 14644 standard for Particulate Cleanliness Class in Cleanrooms and Clean Zones. The return air is also filtered to H14-level via wall-integrated filter packages.

Medical equipment can fit on both sides

Units are also fitted with a switchboard cabinet, preassembled cable set and dimmable lighting

The unit’s medical supply column is equipped in accordance with the recommendation of the Deutsche Interdisziplinäre Vereinigung für Intensiv und Notfallmedizin (DIVI) and can be adapted to clients' needs. It has standard setting dioxygen (O2), compressed air and vacuum, power sockets, a data connection and a nurse call function.

The medical equipment for diagnosis and treatment can be fixed onto the vertical stainless steel tubes on both sides of the column.

Units are also fitted with a switchboard cabinet, preassembled cable set and dimmable lighting (1000 lux in the patient’s room), in accordance with the IEC 60364 and VDE 100 standards.

Collaboration for fast-track production

Viessmann is also manufacturing its own newly designed compact ventilators, high quality respiratory protective face masks and hand sanitizer at its Allendorf factory in Germany. Engineers have collaborated with clinicians and regulators to fast-track production of the new medical equipment.

The disinfectant and face masks are being donated to hospitals and care facilities in the vicinity of the company's Allendorf headquarters

The disinfectant and face masks are being donated to hospitals and care facilities in the vicinity of the company's Allendorf headquarters. Viessmann has designed and developed a new modular intensive care unit, which could make a fundamental contribution to the care of seriously ill COVID-19 patients, building on expertise within its refrigeration solutions division, which manufactures cold rooms for a range of commercial applications.

Viessmann’s modular intensive care unit can be set up quickly, both indoors, for example in exhibition halls or sports arenas, and outdoors where there is appropriate cover. Viessmann employees have created and manufactured disinfectant, hand sanitizer and high quality respiratory protective face masks, which are being donated to hospitals and care facilities in the vicinity of its Allendorf headquarters in Germany.

Integrated climate solutions by Viessmann

Viessmann develops and manufactures seamless and integrated climate solutions for domestic and commercial living spaces, providing people with the optimum room and hot water temperature, electricity and air quality. Through digital platforms and services, Viessmann connects products and systems, ensuring the most efficient, and where possible, renewable, energy sources are employed.

Founded in 1917 and employing approximately 12,300 people worldwide, the German family-owned company attaches particular importance to responsible and long-term action. Co-CEO Maximilian Viessmann represents the fourth generation of the Viessmann family.

The company vision is ‘Creating the living space for the generations of tomorrow.’ Viessmann’s UK headquarters are in Telford, Shropshire and the company has been operational in the UK since 1989.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version

In case you missed it

Honeywell Applies Machine Learning To Boost Energy Efficiency Of Buildings
Honeywell Applies Machine Learning To Boost Energy Efficiency Of Buildings

Machine learning provides a tool to lower energy costs in a building, and Honeywell has launched a platform that incorporates the newer technology. Combining self-learning algorithms with building automation, Honeywell Forge Energy Optimization is a cloud-based system that analyzes a building’s energy consumption pattern and adjusts its settings. “We can help building portfolio owners fine-tune their energy expenditures to drive efficiencies and create more sustainable practices,” says David Trice, Vice President and General Manager, Honeywell Connected Buildings. Autonomous building solutions Honeywell says the autonomous, closed-loop building solution may deliver double-digit energy savings while decreasing a building’s carbon footprint. It can be implemented without significant capital expense or changes to a building’s current operational processes. The system autonomously and continually optimizes a building’s internal set points across hundreds of assets every 15 minutes by evaluating whether the HVAC system is running at peak efficiency.  When analyzing when to make an adjustment, the system considers factors such as time of day, weather, occupancy levels and other data points. The system considers factors such as time of day, weather, occupancy levels Honeywell Forge Energy Optimization calculates its decisions 96 times per 24-hour period in every building in a portfolio. Deployment is a simple plug-and-play process with no changes needed to business mechanics. Systems do not need to be rip-and-replaced. Results of the technology The technology has been demonstrated in a pilot at Hamdan Bin Mohammed Smart University in Dubai, United Arab Emirates, achieving an initial 10% energy savings. The pilot achieved the extra savings over and beyond what was achieved earlier in the highly smart, energy-efficient building with fully connected lighting, cooling, building management, power and efficiency control optimized based on real-time occupancy. The pilot also uncovered local control issues with the chiller plant and fresh air handling unit that were not adjusting to set points. “Honeywell Forge [was able] to drive further energy savings beyond our achievable optimization with the techniques we [had],” says Dr. Mansoor Al Awar, HBMSU’s Chancellor. The university is collaborating with Honeywell to support the advancement of artificial intelligence (AI) and machine learning to drive operational efficiencies. Energy consumption in commercial buildings is significant. Buildings and buildings construction combined are responsible for more than 36% of global final energy consumption and nearly 40% of total direct and indirect CO2 emissions, according to the International Energy Agency (IEA). Energy demand in these sectors continues to rise, driven by improved access to energy in developing countries, greater ownership and use of energy-consuming devices, and rapid growth in global buildings’ floor areas. Opportunities for energy saving It is a market where the potential impact of greater efficiencies is huge It is a market where the potential impact of greater efficiencies is huge. Heating, ventilation and air conditioning often presents the largest opportunity for energy savings in a commercial building. “Buildings aren’t static steel and concrete – they are dynamic ecosystems and their energy needs fluctuate based on ever-changing variables like weather and occupancy,” says Trice. “We are evolving building operations far beyond what would be possible even with a robust team of engineers and the rules they code in their building management system.”

Elon Musk Expresses His Vision For Residential HVAC Innovation – Should We Listen?
Elon Musk Expresses His Vision For Residential HVAC Innovation – Should We Listen?

When a visionary industrial designer turns his attention to the HVAC industry, it’s probably wise to take note. Recently, technology entrepreneur and philanthropist, Elon Musk expressed his vision for residential HVAC, based in part on a new heat pump his engineers designed for the Tesla Model Y electric compact sport utility vehicle. Efficient, quiet home HVAC system According to several reports, Musk seeks to build an efficient and quiet HVAC system for the home, piggybacking on the technology used to make heaters for the newest Tesla Model Y. It’s the first of Tesla’s electric cars to use a heat pump, which is more efficient than previous electric heating systems. Tesla’s previous vehicle models used resistance heating, which is a battery hog Tesla’s previous vehicle models used resistance heating, which is a battery hog. The new heat pump component, including a compressor/chiller and liquid cooled condenser, is designed to be more energy-efficient and provides a more reliable vehicle operation range in cold weather conditions. Model Y heat pump “The model Y heat pump is some of the best engineering I’ve seen in a while,” said Musk on Twitter, adding “[The] team did next-level work.” Musk would ‘love to do HVAC that’s quiet and efficient with humidity control and HEPA filter’ for the home. Tesla car-inspired temperature controls Musk stated that he imagines a full-home HVAC system that is inspired by and maybe linked with the temperature controls inside someone’s Tesla vehicle. The proposal is in line with Musk’s mission to accelerate the advent of sustainable energy. He said, “Reducing a home’s energy usage while deploying solar power capacity are complementary goals”. High-efficiency particulate air filters Tesla HEPA filters are about 10 times larger than a normal automotive cabin air filter Tesla already has experience with HVAC systems and high-efficiency particulate air (HEPA) filters used to clean the cabin air in their Model 5 and Model X vehicles. The Tesla HEPA filters are about 10 times larger than a normal automotive cabin air filter and about “100 times more effective,” according to the company. Tesla HEPA filters The filters remove at least 99.97% of the fine particulate matter and gaseous pollutants, as well as bacteria, viruses, pollen and mold spores. Tesla refers to the extreme level of air cleaning as ‘Bioweapon Defense Mode’. Among other benefits, the filtering system protected California drivers from smoke and kept the vehicles’ cabin air clean during the recent wildfires. Musk first mentioned home air conditioning systems about two years ago, alluding to a home HVAC system that is quiet and efficient with humidity control and a HEPA filter. HEPA filter in a home system “The use of a HEPA filter in a home system would be a ‘life changer’ for people with allergies”, says Musk. The growing popularity of home air purifier products supports the conclusion. Communication between a Tesla vehicle and a Tesla home climate system would allow an intelligent air conditioning system to ‘know’ exactly when a resident will get home and only cool the home as appropriate to save energy. Energy-efficient, high performance HVAC systems Musk has also questioned the wisdom of home air conditioner systems that make pure, fresh water Musk has also questioned the wisdom of home air conditioner systems that make pure, fresh water and then dump it on the ground. The HVAC market has had its share of innovation in recent years, as today’s more energy-efficient, quieter and better-performing systems can attest. Smart thermostats, climate control systems There has also been lots of development in the area of smart thermostats and climate control systems, with the results approximating what Musk envisions achieving with communications between his smart vehicles and smart home systems. But is it time to rethink the technologies again? There is certainly opportunity in the market for any systems that provide better, more sustainable performance, no matter where the ideas originate. Given Musk’s success envisioning a future of electric cars and lower-cost space travel (among other ideas), his thoughts on the future of the HVAC market are at least worth considering.

HVAC Apprenticeships: Investment In Extraordinary Times
HVAC Apprenticeships: Investment In Extraordinary Times

These are unprecedented times for the cooling, heating and ventilation industries. Our ways of operating have been dramatically altered. For many organisations, the short-term focus has been on survival, but as we tentatively look towards the recovery phrase, we are being presented with the chance to embed new ways of working which offer the opportunity for our industries to lead the charge towards future growth. The impact of COVID-19 has the potential to amplify the skills shortages which were threatening to cripple our industries even before we were faced with the challenges of ‘working in lockdown’. Data from the Department of Education has shown that we are failing to attract enough young engineers to fill the posts available. For those that were starting an apprenticeship, a report by the Institute of Refrigeration found that core engineering skills deemed extremely important by employers were not being met by recently recruited apprentices. These issues combined with the disruption young people are now experiencing to their education and training, have the potential to dramatically increase the skills gap. Apprenticeship Trailblazers Having delivered training in the HVACR industry for over thirty years, I believe the launch of the new RACHP Engineering Technician Apprenticeship offers us the first real opportunity to work together to drive up standards and revive the interest of young people in considering a career in the cooling, heating and ventilation industries. A report by the Institute of Refrigeration found that core engineering skills deemed extremely important by employers were not being met by recently recruited apprentices Known as a Trailblazer, this new industry-led apprenticeship saw employers, for the first time, define the new frameworks and standards. This involvement means we should be confident that young people are being trained and assessed to the level required. However, to ensure the continued success of Trailblazers we need all in industry to engage with this new apprenticeship framework and work closely with Colleges and Training providers to implement it, especially in these difficult times. The young people we support today with quality advice, knowledge and skills, will be our workforce of tomorrow. Futureproofing Programmes I am aware that the introduction of the new Trailblazers has not been without its challenges, particularly around the introduction of End-Point Assessment. Yet I believe it is this, that will future-proof our apprenticeship programmes. I believe it is this [Trailblazers], that will future-proof our apprenticeship programmes Instead of being assessed continually throughout their course, all apprentices now must undertake an end-point assessment to complete their qualification. The independent End-Point Assessor’s role is to test whether each apprentice has gained the skills, knowledge and behaviours outlined in the standard set by employers. Unlike previous training programmes, the apprentice is then graded, and like it or not, this is playing an important role in developing the employability attributes of young people entering our industries. I have seen first-hand how the grading system is motivating apprentices to work harder and stretch themselves to achieve a pass, merit or distinction. Enhancing Training With Skills Competitions The new industry-led apprenticeship provides a strong platform for employers to raise standards in our industries, but there is more that we can do to develop our apprentices further. Each year, thousands of young people enhance the training they receive through their apprenticeship by participating in WorldSkills UK Competitions. The ACR industry skill competition ‘SkillFridge’, is delivered in partnership with WorldSkills UK, and assesses apprentices’ knowledge, practical and employability skills in time pressured conditions. The competition is free to enter, and employers can access the Apprenticeship Levy to support their apprentices’ involvement. At last year’s National Final, held in front of over 70,000 visitors at WorldSkills UK LIVE, the UK’s largest apprenticeship, skills and careers event, 95% of those competing said their personal and employability skills had improved after taking part in the competitions. Employers I have spoken with have also remarked on the positive impact competitions have had on their wider workforce, who, spurred on by the apprentices’ success have been encouraged to look at their own training needs. Mark Forsyth with apprentice Chris Bailie who won Silver at WorldSkills Sao Paulo 2015 The ongoing development of our workforce is an issue that has also been highlighted by the Institute of Refrigeration. It found that there is an urgent need for CPD for those who have entered our industries in the last five years, with many showing significant skills gaps. WorldSkills UK’s counterpart WorldSkills Russia has addressed this issue by working with employers and schools to extend its skills competition training programme to enable a wider age range and more diverse groups to enter, not just apprentices. Implementing Global Standards Age eligible winners of SkillFridge are invited to compete for a place in the team that will represent the UK at WorldSkills, the ‘Skills Olympics’. The new industry-led apprenticeship provides a strong platform for employers to raise standards in our industries I am currently remotely training apprentices Dominic Dray who works for Royale Refrigeration and attends Eastleigh College, and Jack Newton, who works for Crowther and Shaw Ltd and attend Leeds College for the next WorldSkills event which takes place in Shanghai, China, next year. There is only one place on the team to represent the UK in Refrigeration and Air Conditioning, and whether its Dominic or Jack who is successful, they will experience an incredible journey and unique method of personal development. Representing your country on an international stage and competing alongside talented peers with the aim of being crowned the best in the world at your skill is an opportunity like no other.  Powering The Technical Education Sector Working with my fellow trainers to support WorldSkills UK in bringing back international best practise to the UK, by using global benchmarking, WorldSkills UK is working to power the development of a world-leading technical education sector and it is my hope that this insight can be used to inform the future development of Trailblazers to ensure we continually raise standards to deliver new solutions for our clients and attract the best young talent. Crucial to the rebuilding of the UK economy, and to ensuring the sustainability of our industries, will be highly skilled, motivated young people. That is why, alongside concentrating on recovery strategies, I am urging business leaders to remain focused on supporting the next generation of engineers so they can play an active role in developing the future of our industries.

vfd