Traditionally, portable cooling technology has been seen as a quick fix to immediate cooling needs. If a customer’s air conditioner went out in the busyness of summer, portable cooling could keep the customer comfortable until a technician could arrive at their home. Such needs and uses for portable cooling still exist, but over the past few years, portable cooling has increasingly developed as a solution for unique cooling needs. Manufacturers are saying this trend will continue.

Misty Wilburn, Marketing Manager for Portacool, said that the market’s renewed interested in employee safety and productivity is driving further demand for portable cooling solutions.

portable evaporative cooling

From a safety standpoint, employers are looking for solutions that reduce heat stress and keep their employees cool"

“From a safety standpoint, employers are looking for solutions that reduce heat stress and keep their employees cool,” she said. She explained that the industry is seeing a large shift surrounding employee safety. The California Division of Occupational Safety and Health (Cal/OSHA) has led this charge by putting regulations in place regarding indoor and outdoor working conditions and will likely be followed by other states.

“For operations that can’t use conventional a/c because of cost or efficiency, portable evaporative cooling - in setting up cool-down stations - can be key to meeting a lot of those regulations,” she said. In addition to this, she said that companies will be able to attract and keep the best employees if they provide a great work environment.

open or closed environment

“Offering those portable cooling areas can keep up focus and morale, which overall increases the profitability of your workforce,” she said. Wilburn explained that contractors can offer this solution as one that will do the most for their customers while also being conscious of cost.

When choosing portable systems for their customers, Wilburn advised contractors to take note of the size of the space that needs to be cooled, the number of employees, electrical options, presence of a water supply, and whether it is an open or closed environment.

multiple large coolers

“By strategically positioning multiple large coolers, you can cool an entire area where you have lots of employees working,” she said. “If you want to spot cool an area and take the product wherever the work takes you, using one single smaller cooler might be the better option.”

In agriculture, portable cooling has been used to cool individual stalls, especially for show animals

All in all, she told contractors that it is important to choose a product that is as versatile as possible for the work environments the customers will find themselves in. Contractors should ensure the cooler is a plug-and-play model that can be set up with little technical skill needed. The degree of maintenance required is also important, as well as the expected lifespan of the equipment. Contractors should widen their view of portable cooling applications, too.

Portable as Supplemental Cooling

“Evaporative cooling is effective in other applications such as farm agriculture, patios, gyms, outdoor venues, events, sports sidelines, offshore platforms, retail stores, rental car pickup facilities, airports, beer gardens, and fast food lines for outdoor employees,” she said. In agriculture, portable cooling has been used to cool individual stalls, especially for show animals.

“Is it dependable?” said Brittany Calderon, Product Manager for Friedrich Air. “Is it quiet? Is it energy-efficient? Those are the three main things that we hear our customers looking for. And of course, cost is always a factor.” Portable cooling can be used to keep areas of a home comfortable when the main air conditioning unit goes out.

Applications for Portable Cooling

“We recommend that contractors all keep a portable in the back of their truck to allow for supplemental cooling,” she said. “If somebody’s a/c goes out and they need to order a part, it’s going to take a few days. They can leave one of those portables at that customer’s house and everybody’s happy.”

She said that portable cooling is often used to supplement other cooling systems

Calderon said that a dual-hose portable air conditioner offers a really good solution for customer’s needs; it’s designed to cool areas faster, more efficiently, and without a complicated installation process. She said that portable cooling is often used to supplement other cooling systems. For example, 2019 had a relatively mild summer in the Northeast, and Friedrich saw interest grow in portable cooling - equipment that people could stow away in a closet when not in use.

electrical equipment rooms

Mike Renier, Vice President of Sales for KwiKool, said that customers are realizing that portable cooling can be used for specific, unique applications, and contractors should keep that in mind. “As the market has evolved, customers have gotten more demanding and not less,” he said. “And what that boils down to is that they’re looking for tailor-made solutions to application problems.”

Some examples of this, he said, include server rooms, electrical equipment rooms, and other high-tech areas where heat-generating equipment needs to be kept cool. These rooms generally have permanent systems in place to cool the equipment; however, these mechanical systems run the risk of occasional failure when components break.

redundant permanent systems

The technology, called Biocool, is designed for use in laboratories and hospitals

“Customers don’t want to have to spend a tremendous amount of money having redundant permanent systems in place,” Renier said. “As an alternative, they can look to portables to supply the duplicated air conditioning.” To operate as intended, such portable equipment will need to have high-efficiency, sensible capacity that can match the heat load, which contractors should look for. A portable cooler with a 1-ton heat load, he explained, will not be able to cool a room with a 5-ton heat load.

Portable technology should always be used with the end goal in mind. For example, KwiKool has developed a portable cooler with a hospital-grade HEPA filter and UV light system. The technology, called Biocool, is designed for use in laboratories and hospitals.

temporary air conditioning

In other applications, cooled air must be moved long distances before it can be exhausted. Portable coolers, when properly designed to pump air further distances, can be temporarily installed in attics. On hot summer days, when attic temperatures can exceed safe temperatures, a portable cooler can be used to keep the heat tolerable for any employees working in that space. Renier reminded contractors that there is a big division between residential and commercial portable cooling products.

“If all you want is some cheap, temporary air conditioning for a bedroom, those personal air conditioners are great,” he said. “But if you want to bring the serious capacity for a high-profile application, don’t buy the cheap stuff. It won’t work. You’re getting what you pay for.”

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

Pandemic Spotlights Need To Balance Costs While Improving Air Quality In Schools
Pandemic Spotlights Need To Balance Costs While Improving Air Quality In Schools

Attitudes about indoor air quality need to change, especially given the current pandemic that forces people to spend most of their time indoors. But addressing the pandemic through increased ventilation and better indoor air quality can be expensive. For example, the Los Angeles Unified School District, the second-largest in the nation, has spent $6 million on HVAC upgrades and new air filters in response to the pandemic and expects to pay about $1.7 million a month for ongoing inspections and filter replacements. Updating & Improving HVAC Systems Updating HVAC systems to minimize virus spread has been an expensive proposition all around. Some school districts in California report the costs are insurmountable. Sometimes seeking to replace or update an HVAC system opens a can of worms: Electrical systems must be rewired, asbestos must be removed, and/or an expensive roof needs to be replaced. Schools in low-income areas are especially likely to be in poor condition, and unable to afford improvements. Some school districts have used money from the federal CARES Act – a $2 trillion federal economic package passed in March – to make ventilation improvements. Hope remains that additional state and/or federal money will be available, but funding is still likely to be inadequate. Airborne Transmission Study showed that some classrooms had air change rates below 0.5 changes per hour The airborne transmission was initially underplayed as a means of spreading the novel coronavirus. There was more emphasis on the dangers of touch during the early days of the pandemic. However, the airborne (aerosol) spread is now believed to make up about 75% of transmissions. A group of 239 scientists from around the world advocated more action to address aerosol spread in a July 2020 open letter to the World Health Organization (WHO). The concern is a global challenge. For example, a survey of 20 classrooms in the United Kingdom, carried out by National Air Quality Testing Services (NAQTS), revealed very low air change rates that could increase the risk of virus transmission. The study showed that some classrooms had air change rates below 0.5 changes per hour (3 to 5 changes per hour would be desirable). Even small increases in flow rate could reduce the risk of infection significantly. Raising airflows from zero to 100 cu m/hour cuts the risk by up to a third, according to NAQTS. Fresh Air Ventilation & Filtration The Scientific Advisory Group for Emergencies (SAGE) advised the UK Government last fall of a need to ensure undisrupted education for children of all ages. A critical part of keeping children in school is clear guidance and support packages, including better ventilation and air filtration, particularly through winter. The German government advises schools to open their windows for at least five minutes every hour Other countries can learn a lot about the value of opening windows to allow in more fresh air from the Germans. For years, Germans have habitually opened their windows twice a day, even in winter. In fact, “lüften,” or airing a room, is among the cheapest and most effective ways of decreasing the spread of the coronavirus. The German government advises schools to open their windows for at least five minutes every hour; for example, when classes are changing. Improving Indoor Air Quality Airing of rooms is a likely factor in the lower number of coronavirus cases reported in Germany compared to, say, the United Kingdom. In the end, improving indoor air quality involves some combination of letting in more fresh air, upgrading air filtration systems, and installing technologies such as UV light to kill pathogens. However, implementing these measures only mitigates the likelihood of contracting COVID-19. Some risk remains.

What Technologies And Trends Will Define HVAC In 2021?
What Technologies And Trends Will Define HVAC In 2021?

The pandemic of 2020 presented unique challenges to the HVAC market, and in many instances, responding to those challenges relied on technical innovation. It’s safe to say that the pandemic accelerated several technology trends, redirected others, and overall raised the stakes in the industry’s ongoing challenge to meet customer needs across a wide spectrum. But what comes now? We asked our Expert Panel Roundtable to weigh in on this question: What technologies and trends will define the HVAC industry in 2021?

Overcoming Engineering Challenges In Riser Design
Overcoming Engineering Challenges In Riser Design

How grooved solutions have been making contractors and engineers reimagine the way they construct risers in vertical buildings? Enter into the right pub, or head to a city’s museum or town hall, and you can often find a picture of how the surrounding area used to look. An image from twenty years ago and the difference isn’t too vast. Fifty years back and there’s a definite change. A picture from over a hundred years ago and it’s practically unrecognizable. And what’s the common theme running through these images? Cities are getting taller. As more people migrated to urban areas, developers saw the need to go higher. But with this comes its own unique set of challenges. How can the safety of ground floor be transferred to, in the most extreme case, level 163? Grooved mechanical pipe joining solutions When it comes to high-rise buildings, there are a number of potential challenges for a piping engineer To find out how grooved mechanical pipe joining solutions are helping developers & engineers go higher, we spoke to Matthew Strohm, Director of Product Development (Piping System Design) at Victaulic. When it comes to high-rise buildings, there are a number of potential challenges that a piping engineer will need to take into consideration, most of which relate to thermal movement and the resulting forces on the building. Other issues such as seismic activity and building creep (the natural movement of a building due to settlement) also need to be taken into account. Compensating for thermal expansion and contraction Specifically related to piping systems and subsequently, pipe joining solutions, is the unique problem of having to compensate for thermal expansion and contraction, while at the same time, accommodating for higher pressure. Change in pipe diameter is not an uncommon concern for engineers, however, providing a solution which could operate at a pressure gauge of 25 bars, or the fluctuating temperature of water, presents its own challenges. It’s with these issues in mind that engineers choose their joining solutions, which is why these are the very criteria we set our Victaulic pipe joining solutions against. Grooved vs. Traditional Pipe Joining For decades, the traditional solutions for joining pipes have been welding, threading or flanging. These are good solutions to choose from, but there is a distinct lack of flexibility in a solution that fuses or flanges system components together. This is where flexible grooved couplings come in. They are solutions that allow controlled linear and angular movement at each joint to accommodate not only for thermal expansion and contraction, but also building sway and creep. So how do flexible grooved couplings manage this? It’s essentially down to the design of their components. The dimensions of the pipe coupling housing key is narrower than the pipe groove, allowing room for movement. Furthermore, the width of the pipe coupling housing allows for pipe end separation, which in turn allows the grooved pipe joint to accommodate movement. Benefits of Grooved couplings There are many benefits of grooved couplings, with space-saving being a key advantage on projects, both large and small There are many benefits of grooved couplings, with space-saving being a key advantage on projects, both large and small. As many project managers and engineers know, saving on space can be the key to unlocking extra value above initial planning. Additionally, grooved couplings are perfectly placed to accommodate for piping movement, whereas welded joints that in their very nature are designed to be fixed in place, need to have an area of space to allow for a welded expansion loop or alternatively, enough space to allow the star-pattern tightening of a flanged flex connector. Saving time, money and labor Besides the savings on space, grooved connections offer contractors savings in three key areas: time, money and labor. The installation-ready design of Victaulic’s grooved couplings allow for an easier installation, meaning a process which might take 30 minutes through a welded solution for instance, can now take just five minutes. As any contractor will testify to, this is valuable time that can be used for other parts of the project. With a reduction in time comes savings in cost and labor. Naturally, less labor is used for the same job and in the case of grooved couplings, less skilled labor is required (in comparison to the high skill level needed for welded joints). It’s these aspects that will ultimately deliver contractors with valuable project savings. Grooved connections offer savings in three key areas: time, money and labor Mechanical riser solutions There are 3 ways to accommodate for thermal movement within risers using a grooved mechanical system: The first method is called top of riser free-floating method and involves installing rigid couplings on the riser and two flexible couplings on the horizontal adjacent piping at the top of the riser, which can reduce the need for riser clamps or other structural during installation and allows the system to move freely within the design tolerances. The second method involves working with grooved expansion loops that help to save up as much as 2/3rd of the size of welded U-shaped expansion loops and avoids forced welded pipe deflection. While welded expansion loops require eight welded joints to assemble, the forces exerted on the joint are far greater than those applied on a grooved expansion loop, and generate greater stress, which ultimately requires larger anchors and guides in order to direct the movement. The third method is working with grooved expansion joints instead of traditional in-line expansion joints, which typically have wear parts and manufacturer-recommended maintenance cycles of five years, which also poses problems due to riser accessibility once the construction is complete. Grooved expansion joints like the Victaulic Style 155 are maintenance-free for the life of the system. Importance of anchors In a system using only flexible joints, risers are installed with anchors at the top and bottom and the piping guided every other length to prevent angular deflection at the joints within the piping run. Anchors distribute the movement forces across the structure and also provide the important task of directing pipe movement. At the pipe anchor location, there will be no differential movement between the piping and the building structure, which forces the pipe to thermally expand or contract from that location. This allows the design engineer to control how and where the movement in a system occurs and to provide the best solution to accommodate that movement. A10 Grooved Riser Anchors upgraded A good manufacturer will always listen to customer demand, especially in an evolving market A good manufacturer will always listen to customer demand, especially in an evolving market. Off the back of strong feedback from contractors, Victaulic recently upgraded its A10 Grooved Riser Anchors to a standard product. With the primary functions of carrying the weights and forces that act downward to the base of the riser and connecting the riser to the rest of the structure, the anchor has been providing sturdy support for some of the tallest buildings around the world. Future trends for high-rise buildings One trend already taking place, and I expect to continue, is contractors bringing riser experts into the project at an earlier stage. It just seems to make logistical sense to operate in this fashion. it’s a more efficient use of time to collaborate early in the process. I believe contractors and engineers will seek assistance from companies such as us to help design blueprints together, working in tandem to produce the right solution. Vertical buildings are on the rise. For generations, people have been moving to urban areas, putting greater demand on housing residents and employees. Through the use of grooved coupling solutions as an alternative to traditional methods, contractors can benefit from greater flexibility, reliability, ease of installation and ultimately and most importantly, speed of the installation process.

vfd